Blackout Sizer Calculator
EN

Gas furnace blower 3/4 HP: how much battery you need1

Gas furnace blower 3/4 HP draws about 750 W (750 W range), runs 50% of the time and uses 9000 Wh per day. Start-up surge: 2000 W.

Estimate from motor power (about 560 W at the shaft) for large furnaces.

Battery needed

HoursWhBattery (Wh)Inverter (W)
For 8 hours30004546826 / 2000
For 24 hours900013637826 / 2000
For 72 hours2700040910826 / 2000

Open in calculator with this appliance →

Stations that fit (24 h)

FranklinWH aPower 2
15000 Wh · 10000 W (15000 W peak)
→
FranklinWH aPower S
15000 Wh · 11500 W (15000 W peak)
→

Shop links are affiliate links: if you buy, we earn a small commission at no cost to you. Picks are based on your numbers, not on commission.

FAQ

How many watts does a Gas furnace blower 3/4 HP use?

Typically 750 W while running, with a range of 750 W depending on model and age. Start-up surge can reach 2000 W.

How long will a 1000 Wh power station run a Gas furnace blower 3/4 HP?

About 1.8 hours on the clock, allowing for the 50% duty cycle, inverter losses and a 20% reserve.

What size power station do I need for a Gas furnace blower 3/4 HP overnight (8 h)?

About 4546 Wh of battery and an inverter rated at least 826 W continuous with 2000 W surge.

Can I run a Gas furnace blower 3/4 HP on solar during an outage?

You need roughly 6000 W of panels in winter to replace a day's use (9000 Wh), charging through a station with a big enough MPPT input.

Other sizes

1/3 HP400 W11/2 HP550 W

Other appliances

Gas boiler (pump + controls)120 WHeating circulation pump45 WPellet stove100 W1Heat pump 3-ton (no backup strips)3500 W1

1 Approximate values: estimated from motor or heater power and typical figures published online, not from a manufacturer chart. Check your appliance label.

Inverter efficiency 88%, usable depth of discharge 90%, reserve 20%. Full method: How we calculate.