Garage door opener 1/2 HP: how much battery you need
Garage door opener 1/2 HP draws about 500 W (500 W range), runs 100% of the time and uses 50 Wh per day. Start-up surge: 600 W.
It runs for seconds a day, so it needs power, not capacity; every opener also has a manual release.
Battery needed
| Hours | Wh | Battery (Wh) | Inverter (W) |
|---|---|---|---|
| For 8 hours | 17 | 26 | 550 / 600 |
| For 24 hours | 50 | 76 | 550 / 600 |
| For 72 hours | 150 | 228 | 550 / 600 |
Open in calculator with this appliance →
Stations that fit (24 h)
Shop links are affiliate links: if you buy, we earn a small commission at no cost to you. Picks are based on your numbers, not on commission.
FAQ
How many watts does a Garage door opener 1/2 HP use?
Typically 500 W while running, with a range of 500 W depending on model and age. Start-up surge can reach 600 W.
How long will a 1000 Wh power station run a Garage door opener 1/2 HP?
About 1.3 hours on the clock, allowing for the 100% duty cycle, inverter losses and a 20% reserve.
What size power station do I need for a Garage door opener 1/2 HP overnight (8 h)?
About 26 Wh of battery and an inverter rated at least 550 W continuous with 600 W surge.
Can I run a Garage door opener 1/2 HP on solar during an outage?
You need roughly 34 W of panels in winter to replace a day's use (50 Wh), charging through a station with a big enough MPPT input.
Other sizes
Other appliances
1 Approximate values: estimated from motor or heater power and typical figures published online, not from a manufacturer chart. Check your appliance label.
Inverter efficiency 88%, usable depth of discharge 90%, reserve 20%. Full method: How we calculate. source