Sump pump 1/3 HP: how much battery you need
Sump pump 1/3 HP draws about 650 W (500–800 W range), runs 100% of the time and uses 1300 Wh per day. Start-up surge: 1600 W.
A sump pump runs only when the pit fills, but a storm can keep it cycling for hours. Champion lists 500–800 W running; we use the middle for energy and the top starting figure (1600 W) for the peak.
Battery needed
| Hours | Wh | Battery (Wh) | Inverter (W) |
|---|---|---|---|
| For 8 hours | 433 | 657 | 716 / 1600 |
| For 24 hours | 1300 | 1970 | 716 / 1600 |
| For 72 hours | 3900 | 5910 | 716 / 1600 |
Open in calculator with this appliance →
Stations that fit (24 h)
Shop links are affiliate links: if you buy, we earn a small commission at no cost to you. Picks are based on your numbers, not on commission.
FAQ
How many watts does a Sump pump 1/3 HP use?
Typically 650 W while running, with a range of 500–800 W depending on model and age. Start-up surge can reach 1600 W.
How long will a 1000 Wh power station run a Sump pump 1/3 HP?
About 1 hours on the clock, allowing for the 100% duty cycle, inverter losses and a 20% reserve.
What size power station do I need for a Sump pump 1/3 HP overnight (8 h)?
About 657 Wh of battery and an inverter rated at least 716 W continuous with 1600 W surge.
Can I run a Sump pump 1/3 HP on solar during an outage?
You need roughly 867 W of panels in winter to replace a day's use (1300 Wh), charging through a station with a big enough MPPT input.
Other sizes
Other appliances
1 Approximate values: estimated from motor or heater power and typical figures published online, not from a manufacturer chart. Check your appliance label.
Inverter efficiency 88%, usable depth of discharge 90%, reserve 20%. Full method: How we calculate. source