Window AC 10,000 BTU: how much battery you need
Window AC 10,000 BTU draws about 1050 W (900–1200 W range), runs 50% of the time and uses 4200 Wh per day. Start-up surge: 2400 W.
A living-room window unit; the compressor start is the peak to plan for. Champion lists 900–1200 W running; we use the middle for energy and the top starting figure (2400 W) for the peak.
Battery needed
| Hours | Wh | Battery (Wh) | Inverter (W) |
|---|---|---|---|
| For 8 hours | 1400 | 2122 | 1155 / 2400 |
| For 24 hours | 4200 | 6364 | 1155 / 2400 |
| For 72 hours | 12600 | 19091 | 1155 / 2400 |
Open in calculator with this appliance →
Stations that fit (24 h)
Shop links are affiliate links: if you buy, we earn a small commission at no cost to you. Picks are based on your numbers, not on commission.
FAQ
How many watts does a Window AC 10,000 BTU use?
Typically 1050 W while running, with a range of 900–1200 W depending on model and age. Start-up surge can reach 2400 W.
How long will a 1000 Wh power station run a Window AC 10,000 BTU?
About 1.3 hours on the clock, allowing for the 50% duty cycle, inverter losses and a 20% reserve.
What size power station do I need for a Window AC 10,000 BTU overnight (8 h)?
About 2122 Wh of battery and an inverter rated at least 1155 W continuous with 2400 W surge.
Can I run a Window AC 10,000 BTU on solar during an outage?
You need roughly 2800 W of panels in winter to replace a day's use (4200 Wh), charging through a station with a big enough MPPT input.
Other sizes
Other appliances
1 Approximate values: estimated from motor or heater power and typical figures published online, not from a manufacturer chart. Check your appliance label.
Inverter efficiency 88%, usable depth of discharge 90%, reserve 20%. Full method: How we calculate. source