Anker SOLIX C1000 Gen 2 error codes
20 codes from the official Anker SOLIX manual (Anker SOLIX C1000 Gen 2), each with the manual page.
Applies to: Anker SOLIX C1000 Gen 2.
| Code | What it means | What to do | Service | Manual |
|---|---|---|---|---|
| E0003 USB-A ポートの電圧異常 | The voltage at the USB-A port is 5.7 V or higher, or 3.8 V or lower. | Reinsert the device connected to the USB-A port, or press the car socket button once. | owner | p. 18 |
| E0003 | The voltage at the USB-A port is above 5.7V or below 3.8V. | Reconnect the device to the USB-A port, or press the car socket button once. | owner | p. 18 |
| E0008 15W USB-C ポートの充電電流過大 | The charging current of the device connected to the 15W USB-C port is 3.8 A or higher. | Reinsert the device connected to the 15W USB-C port, or press the car socket button once. | owner | p. 18 |
| E0008 | The charging current of a device connected to the 15W USB-C port is 3.8A or higher. | Reconnect the device to the 15W USB-C port, or press the car socket button once. | owner | p. 18 |
| E0009 USB-C ポートの充電電流過大 | The charging current of the device connected to the USB-C port is 3 A or 5 A or higher on two consecutive occasions. | Reinsert the device connected to the USB-C port. | owner | p. 18 |
| E0009 | The charging current of a device connected to the USB-C port is 3A or 5A or higher, twice in a row. | Reconnect the device to the USB-C port. | owner | p. 18 |
| E0010 USB-C ポートの充電電流過大 | The charging current of the device connected to the USB-C port is 3 A or 5 A or higher on two consecutive occasions. | Reinsert the device connected to the USB-C port. | owner | p. 18 |
| E0010 | The charging current of a device connected to the USB-C port is 3A or 5A or higher, twice in a row. | Reconnect the device to the USB-C port. | owner | p. 18 |
| E0014 シガーソケット電圧異常 | The car socket voltage is 14.4 V or higher, or 10.4 V or lower. | Wait 30 seconds, then press the car socket button. | owner | p. 18 |
| E0014 | The car socket voltage is 14.4V or higher, or 10.4V or lower. | Wait 30 seconds, then press the car socket button. | owner | p. 18 |
| E0027 BMS 充電温度 高温 | The BMS charging temperature is 58 °C or higher. | Stop using the product until its temperature drops to 55 °C or below. | owner | p. 18 |
| E0027 | The BMS charging temperature is 58°C or higher. | Stop using the unit until the temperature drops to 55°C or below. | owner | p. 18 |
| E0028 BMS 充電温度 低温 | The BMS charging temperature is 2 °C or lower. | Stop using the product until its temperature rises to 3 °C or above. | owner | p. 18 |
| E0028 | The BMS charging temperature is 2°C or lower. | Stop using the unit until the temperature rises to 3°C or above. | owner | p. 18 |
| E0032 BMS 放電温度 高温 | The BMS discharging temperature is 63 °C or higher. | Stop using the product until its temperature drops to 60 °C or below. | owner | p. 18 |
| E0032 | The BMS discharge temperature is 63°C or higher. | Stop using the unit until the temperature drops to 60°C or below. | owner | p. 18 |
| E0033 BMS 放電温度 低温 | The BMS discharging temperature is -19 °C or lower. | Stop using the product until its temperature rises to -17 °C or above. | owner | p. 18 |
| E0033 | The BMS discharge temperature is -19°C or lower. | Stop using the unit until the temperature rises to -17°C or above. | owner | p. 18 |
| E0036 AC 出力過電力 | The AC port output exceeds approximately 1,550 W. | Confirm that the total power of connected devices is 1,550 W or less, then press the AC output button again. | owner | p. 18 |
| E0036 | The AC port output exceeds about 1,550W. | Make sure the total power of connected devices is 1,550W or less, then press the AC output button again. | owner | p. 18 |
Source: official Anker SOLIX manual, read 2026-11-05. "Owner" means the manual lists steps you can take; "dealer" means it directs you to authorized service. Fuel, gas and electrical work on generators is for qualified technicians; follow the manual's safety section.