EGO Nexus 1400W Portable Power Station (PST1400) error codes
4 codes from the official EGO manual (56-Volt Lithium-Ion Power Station PST1400/PST1400-FC), each with the manual page. For 2 of them the manual says to contact an authorized service dealer.
Applies to: EGO Nexus 1400W Portable Power Station (PST1400).
| Code | What it means | What to do | Service | Manual |
|---|---|---|---|---|
| High-temperature Indicator | Indicates that an over-temperature battery or power station has been detected. The indicator shows on the LCD for about 1 minute and the power station stops working. | Turn off the power station and let it cool thoroughly until it can work again. If a battery icon is also flashing, turn off and cool both the power station and battery pack. | owner | p. 26 |
| Communication failure Communication failure (corresponding battery icon flashes) | The corresponding battery icon(s) flash on the LCD screen, indicating a communication failure between the power station and the battery pack. | Contact EGO customer service for help. | dealer | p. 27 |
| Fault Indicator | Indicates one or more faults other than those listed in the troubleshooting table have occurred. The power station stops working. | Contact EGO customer service for help. | dealer | p. 27 |
| Overload Overload Indicator | Indicates the actual output power is greater than the rated power. The AC icon disappears and the power station stops working. | Reduce the number of connected devices or use low-load devices. Make sure the total output power is less than the rated power shown on the LCD screen. Reactivate the AC ports. | owner | p. 27 |
Source: official EGO manual, read 2026-11-05. "Owner" means the manual lists steps you can take; "dealer" means it directs you to authorized service. Fuel, gas and electrical work on generators is for qualified technicians; follow the manual's safety section.