Honda EB2200i error codes
6 codes from the official Honda manual (Honda EB2200i owner's manual), each with the manual page.
Applies to: Honda EB2200i.
| Code | What it means | What to do | Service | Manual |
|---|---|---|---|---|
| Oil Alert Indicator Oil Alert Indicator (red) | The crankcase oil level is about to fall below a safe limit. The red indicator comes on and the Oil Alert system automatically stops the engine. | Check the engine oil level (see page 40) before troubleshooting other areas. | owner | p. 18 |
| Overload Alarm Overload Alarm (Indicator) | The generator is overloaded (above 2.2 kVA) or a connected appliance has a short circuit. The red alarm stays on, output to the appliances shuts off after about four seconds, and the engine keeps running. | If the overload alarm blinks continuously, the inverter unit is abnormal. See Taking Care of Unexpected Problems on page 59. | owner | p. 18 |
| Abnormal output overcurrent Abnormal: Output overcurrent | Listed as a possible cause of the Abnormal status shown by the LED indicators. | See Taking Care of Unexpected Problems on page 59. | owner | p. 19 |
| Engine oil low Warning: Engine oil low | Warning status shown by the LED indicators when the engine oil is low. | Check the engine oil level (see page 40). | owner | p. 19 |
| Inverter unit failure Malfunction: Inverter unit failure | Listed as a possible cause of the Malfunction status shown by the LED indicators. | See Taking Care of Unexpected Problems on page 59. | owner | p. 19 |
| Inverter unit overheat Abnormal: Inverter unit overheat | Listed as a possible cause of the Abnormal status shown by the LED indicators. | See Taking Care of Unexpected Problems on page 59. | owner | p. 19 |
Source: official Honda manual, read 2026-11-03. "Owner" means the manual lists steps you can take; "dealer" means it directs you to authorized service. Fuel, gas and electrical work on generators is for qualified technicians; follow the manual's safety section.