PowerSmart 2500W Inverter Generator Overload
What it means: The generating set is overloaded and the AC protector stops the output to protect the equipment. The engine keeps running. The light may also come on briefly when a motor starts and should go off within about 4 seconds.
What to do
Disconnect the electrical equipment first. Reduce the loads, then press the reset button to restore output. If the red light stays on and the green running light is not on, shut down the engine and check for a malfunction.
When to call service
The manual lists steps the owner can take. If the code comes back after them, or you are unsure, contact an authorized service dealer. A warning: the unit may keep running, but the cause needs attention.
Source: official PowerSmart manual, page 9, read . Summary of the manual, not a reproduction.
Models this manual covers
PowerSmart 2500W Inverter Generator, PowerSmart DB5041C.
Overload in other PowerSmart manuals
- PS5046CE: The red overload indicator lights when an electric motor starts. Normally the engine stops the overload within 4 seconds. Total connected power must not exceed the generator's rated power.
Other 2500W Inverter Generator codes
Questions
What does PowerSmart Overload mean?
The generating set is overloaded and the AC protector stops the output to protect the equipment. The engine keeps running. The light may also come on briefly when a motor starts and should go off within about 4 seconds. (PowerSmart manual for the 2500W Inverter Generator, page 9.)
How do I fix PowerSmart Overload?
Disconnect the electrical equipment first. Reduce the loads, then press the reset button to restore output. If the red light stays on and the green running light is not on, shut down the engine and check for a malfunction.
Fuel, gas and electrical work on a portable / inverter generator is for qualified technicians; follow the safety section of the manual. All 4 2500W Inverter Generator codes →