PowerSmart HB5040DC Overload Indicator (Red)
What it means: Lights when the load exceeds the generator's recommended output. If it stays lit and the running indicator turns off, the engine runs without output power.
What to do
Remove all applied loads and check whether attached devices exceed the recommended output power. Check for faulty or shorted connections. Press the MENU button for about 3 seconds to reset, then start the engine. Apply loads once the running indicator (Green) lights. If the overload indicator returns, contact customer service.
When to call service
The manual directs you to an authorized PowerSmart service dealer for this code if the steps above do not clear it. The unit stops or will not start until the cause is cleared.
Source: official PowerSmart manual, page 10, read . Summary of the manual, not a reproduction.
Models this manual covers
Overload Indicator (Red) in other PowerSmart manuals
- PS5046CE: Output overload. If the red light stays on and the Running indicator goes off, the engine keeps running but produces no output power.
Other HB5040DC codes
Questions
What does PowerSmart Overload Indicator (Red) mean?
Lights when the load exceeds the generator's recommended output. If it stays lit and the running indicator turns off, the engine runs without output power. (PowerSmart manual for the HB5040DC, page 10.)
How do I fix PowerSmart Overload Indicator (Red)?
Remove all applied loads and check whether attached devices exceed the recommended output power. Check for faulty or shorted connections. Press the MENU button for about 3 seconds to reset, then start the engine. Apply loads once the running indicator (Green) lights. If the overload indicator returns, contact customer service. The manual says to contact an authorized service dealer if it continues.
Fuel, gas and electrical work on a portable / inverter generator is for qualified technicians; follow the safety section of the manual. All 5 HB5040DC codes →