A-iPower XOS4600iDF
Generator · XOS. Specs from the manufacturer page (checked ).

The A-iPower XOS4600iDF is a dual fuel open frame inverter generator with 3700 running watts and 4600 starting watts on gasoline. It runs on gasoline or propane, or both with Fuel Sense Technology, and is rated for up to 32 hours of runtime without refueling. It weighs 61.9 lbs (28.0 kg).
Key features
- Dual fuel: gasoline or propane, with Fuel Sense Technology switching from propane to gasoline when propane is depleted or disconnected
- Running/starting watts: 3700/4600 on gasoline; 3350/4150 on propane
- Runtime at 25% load: up to 13.0 hours on a 2.5 gal gas tank, up to 19.0 hours on a 20 lb propane cylinder, up to 32.0 hours with Fuel Sense
- Outlets: 4x 5-20R (20A, 120V), 1x L5-30R (30A, 120V), 1x USB-A (3.6A, 5VDC), 1x USB-C (3.0A)
- 161cc OHV 4-cycle engine with low effort recoil start
- Pure sine wave output with less than 3% THD; full copper alternator
- Parallel capable with both 120V and 240V options (requires PKS7200 kit, sold separately)
- Carbon monoxide (CO) shut-off system; as low as 62 dB noise level
Specifications
| Running watts | 3700 W |
|---|---|
| Peak / surge | 4600 W |
| Fuel | dual-fuel |
| Tank | 9.4 L (2.5 gal) |
| Noise | 62 dB |
| CO shutoff | Yes |
| AC output voltage | 120V |
| Weight | 28 kg (61.7 lb) |
| Warranty | 3 years |
From the A-iPower page. Values the manufacturer does not publish are left out.
What is in the box
- Funnel
- Tool kit
- 30A RV adapter
- LP regulator
- Quick start guide
- Manual
Similar inverter & portable generators
Cummins Onan P4500i
Firman H03655
WEN DG4500iX
Anker SOLIX Smart Generator 5500
Energizer eZV4800
WEN DF472
WEN DF472X
Connection and wiring
Follow the diagrams in the A-iPower manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Open the A-iPower manual (PDF) →
Error codes and troubleshooting
We found no error-code table in this manual. Its troubleshooting section is the reference.
FAQ
Can the A-iPower XOS4600iDF start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 4600 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.