Allpowers SOLAX SE200
Solar panel. Specs from the manufacturer page (checked ).
The ALLPOWERS SE200 is a 200 W foldable laminated solar panel with a monocrystalline ETFE surface rated at 23–25% efficiency and an IP68 rating. It weighs 7.16 kg and has a built-in stand for plug-and-play setup. It connects to power stations with solar inputs when the panel's power, current and voltage match what the station requires.
Key features
- 200 W laminated monocrystalline panel with an ETFE surface and 23–25% conversion efficiency
- IP68 rated: water, dust and shock resistant
- Foldable build with a built-in stand and plug-and-play setup
- Weighs 7.16 kg
- Listed electrical specs: 48.96V, 41.6V, 5.33A and 4.8A
- Operating temperature range -20℃ to 60℃
- Works with power stations that have solar connectors, such as S700, S1500 PLUS, R600, R1500, R2500, R3500, R4000 and P100, after checking power, current and voltage
What it is for
- camping
- van life
- boating
- off-grid backup
Specifications
| Rated power | 200 W |
|---|---|
| Weight | 7.16 kg (15.8 lb) |
| Dimensions | 205.6 × 58.7 × 0.3 cm (80.9 × 23.1 × 0.1 in) |
From the Allpowers page. Values the manufacturer does not publish are left out.
Connection and wiring
Follow the diagrams in the Allpowers manual.
Open the Allpowers manual (PDF) →
Error codes and troubleshooting
Solar panels have no error codes; faults show on the connected charge controller or power station.
FAQ
How much energy does the Allpowers SOLAX SE200 make per day?
About 300 Wh on a short winter day (2 peak sun hours) and 825 Wh in summer (5.5 h), after 25 % losses for angle, heat and the charge controller. Rated 200 W.
How long does it take to recharge a 1,000 Wh power station?
About 1.2 sunny summer days or 3.3 winter days with this one panel. Check that the station's solar input accepts the panel's voltage.