Blackout Sizer Calculator
EN
Home›Home Battery Systems›Anker SOLIX›E10

Anker SOLIX E10

Home battery · Solix. Specs from the manufacturer page (checked ).

The Anker SOLIX E10 is a whole-home backup home-battery system with up to 30 kWh of storage per single unit and 7.6 kW rated output. It can be expanded to 90 kWh with three units, and each unit has 10 kW turbo output that the page says sustains 90 minutes at 86°F (30°C) with 2 or more battery packs.

View at Anker SOLIX →Sponsored link; we may earn a commission.
Capacity
30000Wh
Continuous
7600W
Solar input
9000W
Expandable
Yes

Key features

What it is for

Specifications

Capacity30000 Wh
Continuous output7600 W
Solar input9000 W
ExpandableYes
Fueltri-fuel

From the Anker SOLIX page. Values the manufacturer does not publish are left out.

How long it runs common appliances

ApplianceWattsRuns?Hours
Refrigerator (with freezer)120 W (600 start)yes23.6 days
Chest freezer100 W (500 start)yes33.0 days
CPAP (no humidifier)35 W (40 start)yes28.3 days
Gas boiler (pump + controls)120 W (300 start)yes16.5 days
Wi-Fi router + modem/ONU12 Wyes82.5 days
Starlink (standard dish)60 W (100 start)yes16.5 days
TV 50"75 Wyes13.2 days
Sump pump 1/2 HP920 W (2150 start)yes26 h
Well pump 1/2 HP880 W (2000 start)yes27 h
Space heater 1500 W1500 Wyes23 h

Assumes 88 % inverter efficiency, 90 % usable capacity and typical duty cycles. Build your own list in the calculator.

All Anker SOLIX models →

Connection and wiring

Follow the diagrams in the Anker SOLIX manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.

Error codes and troubleshooting

We found no error-code table in this manual. Its troubleshooting section is the reference.

FAQ

How long will the Anker SOLIX E10 run a refrigerator?

About 566 hours for a typical 120 W refrigerator that runs 35 % of the time, after inverter and depth-of-discharge losses.

Can the Anker SOLIX E10 start a sump pump or well pump?

Starting surge matters more than running watts: this unit is rated 7600 W output (no separate peak published). That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.

Anker SOLIX E10View at Anker SOLIX