Firman W01782
Generator · W01782. Specs from the manufacturer page (checked ).

The FIRMAN W01782 is a portable gasoline inverter generator with 1700 running watts and 2100 starting watts at 120V. It has an 80cc engine, a 0.9-gallon fuel tank, and less than 3% THD output for sensitive electronics.
Key features
- Output: 1700 running watts and 2100 starting watts at 120V
- Less than 3% THD clean power for laptops, phones, cameras and small appliances
- Outlets: one 5-20R 120V 20A duplex outlet, one USB-A port (2.1A/5V DC/10W), one 12V DC power port (8.3A/12V DC/100W)
- 80cc FIRMAN engine with simple recoil start
- Low oil shutoff protection
- 0.9-gallon fuel tank, up to 9 hours runtime at 25% load
- 59 dB at 25% load
- Covered control panel
What it is for
- camping
- tailgating
- RV trips
- outdoor events
Specifications
| Running watts | 1700 W |
|---|---|
| Peak / surge | 2100 W |
| Fuel | gasoline |
| Tank | 3.4 L (0.9 gal) |
| Noise | 59 dB |
| AC output voltage | 120V |
| Weight | 20.8 kg (45.9 lb) |
From the Firman page. Values the manufacturer does not publish are left out.
What is in the box
- Protective cover
- Engine oil
- Oil funnel
- Spark plug wrench
- Screwdriver
- 12V battery cable
Similar inverter & portable generators
WEN 56203i
A-iPower SC2000i
A-iPower SUA2000iD
A-iPower SUA2300i
A-iPower SUA2301iD
Briggs & Stratton P2400
DuroMax XP2300iH
Connection and wiring
Follow the diagrams in the Firman manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| Circuit Breakers | The receptacles are protected by an AC circuit protector that trips if the generator is overloaded or an external short circuit occurs. | Disconnect all electrical loads and determine the cause before using the generator again. If overloading caused the trip, reduce the load. Reset by pressing the protector button. Continuous tripping may damage the generator or equipment. | 8 |
| Oil Warning Indicator Light | Indicates the oil has fallen below the minimum level. The engine stops automatically and will not start until the proper amount of oil is in the crankcase. | Check the oil level when this light turns on. Add the proper amount of engine oil to the crankcase before attempting to start the engine. | 8 |
| Overload Indicator Light | Connected devices have exceeded the generator's wattage or amperage capacity, or a power surge occurred. The AC Power light goes off, the engine keeps running, and power to the receptacles is cut. | Keep the total power drawn from all receptacles within the nameplate rating. | 8 |
| Circuit Breaker | The receptacles are protected by an AC circuit protector that trips if the generator is overloaded or an external short circuit occurs. | Disconnect all electrical loads and find the cause before using the generator again. If overloading caused the trip, reduce the load. Reset by pressing the button on the protector. Continuous tripping may damage the generator or equipment. | 9 |
| Output Ready | Stays on during normal operation. Turns off when the generator is overloaded. | — | 9 |
| AC Reset | The inverter has entered a protective state and AC output is interrupted. | Press the AC Reset Button to restore the output. | 12 |
6 of 13 codes. From the Firman manual. All 13 WH03242 / T09371 / H07553 / W03083 codes →
FAQ
Can the Firman W01782 start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 2100 W peak. That is below a typical 1/2 HP sump pump start (about 2150 W); check your pump label. Use the calculator with your exact pump.