Fossibot SP200
Solar panel. Specs from the manufacturer page (checked ).
The Fossibot SP200 is a 200 W foldable solar panel with monocrystalline cells and 23.4% conversion efficiency, used to charge solar generators. It has an IP67 splash-resistant surface, a kickstand for angle adjustment, and MC4 connectors, and the manufacturer says it should not be exposed to rain or snow.
Key features
- 200 W panel output
- 23.4% conversion efficiency with monocrystalline cells
- IP67 splash-resistant sunlight-generating side; do not expose to rain or snow
- Built-in kickstands for adjusting the angle
- MC4 connectors only, with no USB ports
- Can connect in series or parallel; 2 x 200 W with the F2400 power station
- MPPT charge controller mode
- 12-month warranty
What it is for
- camping
- fishing
- hiking
Specifications
| Rated power | 200 W |
|---|---|
| Warranty | 1 years |
From the Fossibot page. Values the manufacturer does not publish are left out.
Connection and wiring
Follow the diagrams in the Fossibot manual.
Open the Fossibot manual (PDF) →
Error codes and troubleshooting
Solar panels have no error codes; faults show on the connected charge controller or power station.
FAQ
How much energy does the Fossibot SP200 make per day?
About 300 Wh on a short winter day (2 peak sun hours) and 825 Wh in summer (5.5 h), after 25 % losses for angle, heat and the charge controller. Rated 200 W.
How long does it take to recharge a 1,000 Wh power station?
About 1.2 sunny summer days or 3.3 winter days with this one panel. Check that the station's solar input accepts the panel's voltage.