Pulsar 2200W Dual Fuel Inverter
1800 W, dual-fuel
Generac GP3000i
Generator · GP Series. Specs from the manufacturer page (checked ).
The Generac GP3000i is a 149cc inverter generator with 2300 W running output and 3000 W starting output. It has a 1.06 gal (4.0 L) fuel tank and a run time of 4.5 hours at 50% of rated load.
Check on Amazon →Sponsored link; we may earn a commission.
Running
2300W
Peak / surge
3000W
Run time @50 %
4.5h
Weight
27kg
Warranty
3yr
Key features
- PowerRush Advanced Technology delivers over 50% more starting capacity.
- PowerDial controls choke, run and off, with fuel shut-off integrated into the dial.
- Economy Mode automatically adjusts engine speed to save fuel and reduce sound emissions.
- Outlets: (1) 120V 30A L5-30R twistlock and (1) 120V 20A 5-20R duplex, plus 5VDC 1A/2.1A USB outlets.
- Recoil pull start, with low oil shutdown.
- Parallel Ready: connects two GP3000i units for twice the power, with the parallel kit sold separately.
- Generator status lights show low oil, overload and ready-to-use states.
- 3 Year Limited residential warranty.
Specifications
| Running watts | 2300 W |
|---|---|
| Peak / surge | 3000 W |
| Tank | 4 L (1.1 gal) |
| Run time at 50 % load | 4.5 h |
| AC output voltage | 120 VAC |
| Weight | 27 kg (59.5 lb) |
| Dimensions | 56.5 × 33.9 × 46.7 cm (22.2 × 13.3 × 18.4 in) |
| Warranty | 3 years |
From the Generac page. Values the manufacturer does not publish are left out.
What is in the box
- Engine oil
- Oil funnel
- Tool kit
- Owner's Manual
Similar inverter & portable generators
Yamaha EF2200iS
1800 W
Champion 2500-Watt Dual Fuel Inverter
1850 W, dual-fuel
Honda EU3200i
2600 W, gas
Westinghouse iGen2800DFc
2200 W, dual-fuel
Ryobi RYI2322E
2300 W
WEN DF280iX
2250 W, dual-fuel
Cummins Onan P2500i
2200 W, gasoline
Generac GP3000i comparisons
- GP3000i vs Pulsar 2200W Dual Fuel Inverter
- GP3000i vs Yamaha EF2200iS
- GP3000i vs Champion 2500-Watt Dual Fuel Inverter
- GP3000i vs Honda EU3200i
- GP3000i vs Westinghouse iGen2800DFc
Connection and wiring
Follow the diagrams in the Generac manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Error codes and troubleshooting
We found no error-code table in this manual. Its troubleshooting section is the reference.
FAQ
How long does the Generac GP3000i run on a tank?
The maker rates it at 4.5 hours at 50 % load (about 1,150 W) on a 1.1-gal tank. A light load such as a refrigerator and lights runs longer; a full load runs shorter.
Can the Generac GP3000i start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 3000 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.