Generac Protector 50kW Diesel (RD05033)
50000 W, diesel
Generac Protector XG 60kW
Standby generator · Protector Series. Specs from the manufacturer page (checked ).
The Generac Protector XG 60kW is an automatic standby generator with 60,000 W running output that runs on liquid propane or natural gas. It senses a power outage, starts on its own, and powers the entire home or business, including large appliances and sensitive electronics. It weighs 808 kg (1,781 lb).
View at Generac →Sponsored link; we may earn a commission.
Running
60000W
Fuel
dual-fuel
Weight
808kg
Key features
- 60,000 W running watts
- Automatic start on power outage, powering the entire home or business
- Quiet-Test mode: five-minute test at lower speed, programmable weekly, biweekly, or monthly
- Cellular connectivity for monitoring with Mobile Link (owner) and Fleet (servicer)
- TruePower technology with less than 5% total harmonic distortion
- Controller-selectable fuel type: Liquid Propane or Natural Gas
- Regular maintenance items accessible from one side of the generator
- 4.5 L 4-cylinder in-line engine with 11 L oil capacity
- Aluminum enclosure, electro-galvanized steel and aluminum frame components, stainless-steel exhaust system
What it is for
- Home backup power
- Business backup power
Specifications
| Running watts | 60000 W |
|---|---|
| Fuel | dual-fuel |
| Weight | 808 kg (1781.3 lb) |
From the Generac page. Values the manufacturer does not publish are left out.
What is in the box
- Flooded lead acid Group 27 battery
Similar standby generators
Generac Protector 48kW Diesel (RD04833)
48000 W, diesel
Generac Protector XG 48kW
48000 W, dual-fuel
Generac Protector XG 80kW
80000 W, dual-fuel
Connection and wiring
Follow the diagrams in the Generac manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Error codes and troubleshooting
We found no error-code table in this manual. Its troubleshooting section is the reference.
FAQ
Can the Generac Protector XG 60kW start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 60000 W output (no separate peak published). That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.