Anker SOLIX F3800
3840 Wh, 6000 W
Pecron E3800LFP
Power station. Specs from the manufacturer page (checked ).
The Pecron E3800LFP is a 3840 Wh portable power station with 4200 W output and LiFePO4 chemistry. Its solar inputs are two XT60-M ports rated up to 1500 W each and one DC5521 port rated 150 W max.
Check on Amazon →Sponsored link; we may earn a commission.
Capacity
3840Wh
Continuous
4200W
Solar input
3000W
Chemistry
LiFePO4
Key features
- Capacity 3840 Wh with 4200 W output, LiFePO4 chemistry
- Two XT60-M solar input ports, each Voc 32V~150V, 1500 W max, 20 A max (3000 W max combined)
- DC5521 solar input port: Voc 12V~30V, 150 W max, 7 A max
- 5V, 9V, 12V/18W output
- 1800W-15A cable
Specifications
| Capacity | 3840 Wh |
|---|---|
| Continuous output | 4200 W |
| Solar input | 3000 W |
| Battery chemistry | LiFePO4 |
From the Pecron page. Values the manufacturer does not publish are left out.
How long it runs common appliances
| Appliance | Watts | Runs? | Hours |
|---|---|---|---|
| Refrigerator (with freezer) | 120 W (600 start) | yes | 3.0 days |
| Chest freezer | 100 W (500 start) | yes | 4.2 days |
| CPAP (no humidifier) | 35 W (40 start) | yes | 3.6 days |
| Gas boiler (pump + controls) | 120 W (300 start) | yes | 51 h |
| Wi-Fi router + modem/ONU | 12 W | yes | 10.6 days |
| Starlink (standard dish) | 60 W (100 start) | yes | 51 h |
| TV 50" | 75 W | yes | 41 h |
| Sump pump 1/2 HP | 920 W (2150 start) | yes | 3.3 h |
| Well pump 1/2 HP | 880 W (2000 start) | yes | 3.5 h |
| Space heater 1500 W | 1500 W | yes | 2.9 h |
Assumes 88 % inverter efficiency, 90 % usable capacity and typical duty cycles. Build your own list in the calculator.
Similar portable power stations
Anker SOLIX F3800 Plus
3840 Wh, 6000 W
Bluetti Elite 400
3840 Wh, 2600 W
Fossibot F3600 Pro
3840 Wh, 3600 W
Goal Zero YETI PRO 4000
3993.6 Wh, 3600 W
Growatt HELIOS 3600
3686 Wh, 3600 W
EcoFlow DELTA Pro
3600 Wh, 3600 W
EcoFlow DELTA Pro 3
4096 Wh, 4000 W
Connection and wiring
Follow the diagrams in the Pecron manual.
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| 1 | Battery temperature is too low. | Wait until the temperature rises above 0°C. It recovers automatically when the temperature increases. | 25 |
| 10 | DC output current is too high. | Stop DC output. Check the specifications and ratings of the connected equipment. | 25 |
| 11 | A short circuit is detected on the DC output. | Stop DC output. Check the specifications and ratings of the connected equipment. | 25 |
| 12 | DC input voltage is too low for charging. | Increase the input voltage to the specified range and retry. | 25 |
| 13 | The charging board is overheating during DC charging. | Temporarily suspend DC charging. Check whether the charging equipment or cables are abnormal. | 25 |
| 2 | Battery temperature is too high. | Wait until the temperature drops below 50°C. It recovers automatically when the temperature decreases. | 25 |
6 of 24 codes. From the Pecron manual. All 24 E3800LFP codes →
FAQ
How long will the Pecron E3800LFP run a refrigerator?
About 72 hours for a typical 120 W refrigerator that runs 35 % of the time, after inverter and depth-of-discharge losses.
Can the Pecron E3800LFP start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 4200 W output (no separate peak published). That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.