Blackout Sizer Calculator
EN
Home›Inverter & Portable Generators›Pulsar›5250-Watt Dual Fuel with CO Sentry

Pulsar 5250-Watt Dual Fuel with CO Sentry

Generator. Specs from the manufacturer page (checked ).

Pulsar 5250-Watt Dual Fuel with CO Sentry
Photo: Pulsar

The Pulsar PG5250BCO is a dual-fuel portable generator that runs on gasoline or propane. On gasoline it is rated 5250 peak watts and 4250 running watts, and on propane it is rated 4750 peak watts and 3850 running watts. It has a 224cc, 7HP engine and a 4-gallon steel fuel tank.

View at Pulsar →Sponsored link; we may earn a commission.
Running
4250W
Peak / surge
5250W
Fuel
dual-fuel
Run time @50 %
10h

Key features

What it is for

Specifications

Running watts4250 W
Peak / surge5250 W
Fueldual-fuel
Tank15.14 L (4.0 gal)
Run time at 50 % load10 h
AC output voltage120V and 120/240V

From the Pulsar page. Values the manufacturer does not publish are left out.

What is in the box

Similar inverter & portable generators

All Pulsar models →

Connection and wiring

We have not linked an official manual for this model yet; see the Pulsar page.

Error codes and troubleshooting

We have not found an official code table for this model yet.

FAQ

How long does the Pulsar 5250-Watt Dual Fuel with CO Sentry run on a tank?

The maker rates it at 10 hours at 50 % load (about 2,125 W) on a 4.0-gal tank. A light load such as a refrigerator and lights runs longer; a full load runs shorter.

Can the Pulsar 5250-Watt Dual Fuel with CO Sentry start a sump pump or well pump?

Starting surge matters more than running watts: this unit is rated 5250 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.

Pulsar 5250-Watt Dual Fuel with CO SentryView at Pulsar