DuroMax XP13000EH
10500 W, dual-fuel
Pulsar PG13000TRCO
Generator. Specs from the manufacturer page (checked ).
The Pulsar PG13000TRCO is a tri-fuel portable generator with 13,000 W peak and 10,200 W running output on gasoline. It also runs on propane (11,500 W peak / 9,200 W running) and natural gas (10,500 W peak / 8,160 W running). It has an 8-gallon fuel tank and electric, remote, and recoil start options.
View at Pulsar →Sponsored link; we may earn a commission.
Running
10200W
Peak / surge
13000W
Fuel
tri-fuel
Run time @50 %
7.5h
CO shutoff
Yes
Key features
- Tri-fuel: gasoline 13,000 W peak / 10,200 W running; propane 11,500 W peak / 9,200 W running; natural gas 10,500 W peak / 8,160 W running
- 8-gallon fuel tank, up to 7.5 hours of runtime at half load (gasoline)
- Remote, electric, and recoil start
- Outlets: four 120V GFCI, one 120/240V L14-30R, one 120/240V L14-50R, one 12V DC output for battery charging
- Low oil shutdown, carbon monoxide detection, and automatic voltage regulation
- Digital meter shows voltage, frequency, run time, total hours, and maintenance reminders
- Powder-coated steel frame, 12-inch never-flat wheels, and fold-down handles
What it is for
- home backup
- job site
- RV
Specifications
| Running watts | 10200 W |
|---|---|
| Peak / surge | 13000 W |
| Fuel | tri-fuel |
| Tank | 30.3 L (8.0 gal) |
| Run time at 50 % load | 7.5 h |
| CO shutoff | Yes |
| AC output voltage | 120/240V |
From the Pulsar page. Values the manufacturer does not publish are left out.
What is in the box
- Remote control
- Battery
- Propane hose
- Natural gas hose
- Funnel
- Spark plug wrench
Similar inverter & portable generators
DuroMax XP13000HX
10500 W, dual-fuel
DuroMax XP13000HXT
10500 W, tri-fuel
WEN TF1300iX
10500 W, tri-fuel
Westinghouse WGen9500
9500 W, gasoline
Westinghouse WGen9500DF
9500 W, dual-fuel
Westinghouse WGen9500DFc
9500 W, dual-fuel
Westinghouse WGen9500TFc EFI
9500 W, tri-fuel
Connection and wiring
Follow the diagrams in the Pulsar manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Open the Pulsar manual (PDF) →
Error codes and troubleshooting
We found no error-code table in this manual. Its troubleshooting section is the reference.
FAQ
How long does the Pulsar PG13000TRCO run on a tank?
The maker rates it at 7.5 hours at 50 % load (about 5,100 W) on a 8.0-gal tank. A light load such as a refrigerator and lights runs longer; a full load runs shorter.
Can the Pulsar PG13000TRCO start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 13000 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.