Pulsar PG15000TRCO
Generator · CO Sentry. Specs from the manufacturer page (checked ).

The Pulsar PG15000TRCO is a tri-fuel portable generator rated at 15,000 peak watts and 12,000 running watts on gasoline. It also runs on propane (10,800 running watts) or natural gas (9,600 running watts). It has a 9.5-gallon gasoline tank that provides up to 10 hours of runtime at half load.
Key features
- Runs on gasoline, propane, or natural gas
- Peak/running output: 15,000/12,000 W on gasoline, 13,500/10,800 W on propane, 12,000/9,600 W on natural gas
- Three starting options: recoil, one-push electric, and remote start
- 550cc single-cylinder 4-stroke OHV engine
- 9.5-gallon gasoline tank with up to 10 hours at half load
- Outlets: one 120V/240V 50A, one 120V/240V 30A, one 120V 30A, four 120V 20A GFCI, and a 12V DC terminal
- Digital display shows voltage, frequency, and hour information
- CO Sentry carbon monoxide detection and shutdown, low-oil shutdown, overload protection, and short-circuit protection
What it is for
- home backup
- RV
- jobsites
- emergency power
Specifications
| Running watts | 12000 W |
|---|---|
| Peak / surge | 15000 W |
| Fuel | tri-fuel |
| Tank | 36 L (9.5 gal) |
| Run time at 50 % load | 10 h |
| CO shutoff | Yes |
| AC output voltage | 120V/240V |
From the Pulsar page. Values the manufacturer does not publish are left out.
Similar inverter & portable generators
DuroMax XP15000HXT
DuroMax XP15000EH
DuroMax XP16000iH
DuroMax XP16000iHT
DuroMax XP13000EH
DuroMax XP13000HX
DuroMax XP13000HXT
Connection and wiring
Follow the diagrams in the Pulsar manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Open the Pulsar manual (PDF) →
Error codes and troubleshooting
We found no error-code table in this manual. Its troubleshooting section is the reference.
FAQ
How long does the Pulsar PG15000TRCO run on a tank?
The maker rates it at 10 hours at 50 % load (about 6,000 W) on a 9.5-gal tank. A light load such as a refrigerator and lights runs longer; a full load runs shorter.
Can the Pulsar PG15000TRCO start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 15000 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.