GenMax GM3300i
3000 W, gasoline
Pulsar PG3500MR
Generator. Specs from the manufacturer page (checked ).
The Pulsar PG3500MR is a gasoline inverter-generator rated at 3,000 running watts and 3,500 peak watts. It is powered by a 208cc OHV 7HP gasoline engine and has a 4-gallon fuel tank that provides up to 12 hours of run time at half load.
View at Pulsar →Sponsored link; we may earn a commission.
Running
3000W
Peak / surge
3500W
Fuel
gasoline
Run time @50 %
12h
Key features
- 3,500 peak watts / 3,000 running watts
- 208cc OHV 7HP single-cylinder 4-stroke gasoline engine, CARB approved
- 4-gallon fuel tank with up to 12 hours of run time at half load
- Two 120V outlets and one 12V DC output
- Automatic low oil shutdown
- Recoil start
- Fold-down locking handle and never-flat wheels (mobility kit)
What it is for
- emergency backup power
- camping
- construction sites
- outdoor events
Specifications
| Running watts | 3000 W |
|---|---|
| Peak / surge | 3500 W |
| Fuel | gasoline |
| Tank | 15.1 L (4.0 gal) |
| Run time at 50 % load | 12 h |
| AC output voltage | 120V |
From the Pulsar page. Values the manufacturer does not publish are left out.
Similar inverter & portable generators
Honda EU3000iS
3000 W
Firman WH02942
2900 W, dual-fuel
WEN 56360i
2900 W
WEN 56360iX
2900 W
WEN DF360iX
2900 W, dual-fuel
A-iPower AP3700i
3200 W, gasoline
EcoFlow Smart Generator (Dual Fuel)
3200 W, dual-fuel
Connection and wiring
Follow the diagrams in the Pulsar manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Open the Pulsar manual (PDF) →
Error codes and troubleshooting
We found no error-code table in this manual. Its troubleshooting section is the reference.
FAQ
How long does the Pulsar PG3500MR run on a tank?
The maker rates it at 12 hours at 50 % load (about 1,500 W) on a 4.0-gal tank. A light load such as a refrigerator and lights runs longer; a full load runs shorter.
Can the Pulsar PG3500MR start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 3500 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.