A-iPower GXS5000RD
4000 W, dual-fuel
Pulsar PG5250
Generator. Specs from the manufacturer page (checked ).
The Pulsar PG5250 is a gasoline-fueled portable generator with 4,250 W rated running output and 5,250 W peak output. It uses a single-cylinder, air-cooled OHV engine with recoil start and has a 4-gallon fuel tank.
View at Pulsar →Sponsored link; we may earn a commission.
Running
4250W
Peak / surge
5250W
Fuel
gasoline
Run time @50 %
8h
Key features
- 5,250 peak watts / 4,250 running watts
- Single-cylinder, 4-stroke, air-cooled OHV engine with recoil start
- 4-gallon fuel tank gives up to 8 hours of continuous operation at half load
- Two AC 120V outlets, one 30 AMP RV outlet, one 120/240V twist-lock outlet, and one 12V DC output (trickle charge)
- Fold-down handle and never-flat wheels
- Low oil shut-off, 3-in-1 digital meter, and automatic voltage regulation
What it is for
- home backup during power outages
- portable power while away from home
Specifications
| Running watts | 4250 W |
|---|---|
| Peak / surge | 5250 W |
| Fuel | gasoline |
| Tank | 15.14 L (4.0 gal) |
| Run time at 50 % load | 8 h |
| AC output voltage | 120/240V |
From the Pulsar page. Values the manufacturer does not publish are left out.
Similar inverter & portable generators
A-iPower SUA5800iED
4500 W, dual-fuel
Champion 5500-Watt Dual Fuel Inverter
4000 W, dual-fuel
DuroMax XP5500HX
4500 W, dual-fuel
Firman T04073
4000 W, tri-fuel
Honda EM5000SXK3
4500 W, gas
WEN 56477i
4000 W, gasoline
WEN 56480iX
4000 W
Connection and wiring
Follow the diagrams in the Pulsar manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Open the Pulsar manual (PDF) →
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| LUBE | Shown on the digital hour meter at the first 25 hours of operation and again every 100 hours after that, indicating that lubrication service is due. | Use the hour meter together with the maintenance schedule in this manual to determine when and what type of service the unit needs. | 18 |
From the Pulsar manual. All 1 PG5250 codes →
FAQ
How long does the Pulsar PG5250 run on a tank?
The maker rates it at 8 hours at 50 % load (about 2,125 W) on a 4.0-gal tank. A light load such as a refrigerator and lights runs longer; a full load runs shorter.
Can the Pulsar PG5250 start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 5250 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.