Blackout Sizer Calculator
EN
Home›Inverter & Portable Generators›Pulsar›PG6580E

Pulsar PG6580E

Generator. Specs from the manufacturer page (checked ).

Pulsar PG6580E
Photo: Pulsar

The Pulsar PG6580E is a gas-powered portable generator with 6,580 peak watts and 5,500 rated running watts. It runs on gasoline or propane (dual-fuel) and provides 120V and 240V output.

Check on Amazon →Sponsored link; we may earn a commission.
Running
5500W
Peak / surge
6580W
Fuel
dual-fuel
Warranty
3yr

Key features

What it is for

Specifications

Running watts5500 W
Peak / surge6580 W
Fueldual-fuel
AC output voltage120V/240V
Warranty3 years

From the Pulsar page. Values the manufacturer does not publish are left out.

What is in the box

Similar inverter & portable generators

Pulsar PG6580E comparisons

All Pulsar models →

Connection and wiring

Follow the diagrams in the Pulsar manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.

Open the Pulsar manual (PDF) →

Error codes and troubleshooting

We found no error-code table in this manual. Its troubleshooting section is the reference.

FAQ

Can the Pulsar PG6580E start a sump pump or well pump?

Starting surge matters more than running watts: this unit is rated 6580 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.

Pulsar PG6580ECheck on Amazon