Champion 5500-Watt Dual Fuel
5500 W, dual-fuel
Pulsar PGX60BiSRCO
Generator. Specs from the manufacturer page (checked ).
The Pulsar PGX60BiSRCO is a dual-fuel inverter generator that runs on gasoline or propane. On gasoline it is rated at 5400 running watts and 6000 peak watts, and on propane at 4600 running watts and 5400 peak watts. It has a 3-gallon tank and runs up to 6.5 hours at half load.
View at Pulsar →Sponsored link; we may earn a commission.
Running
5400W
Peak / surge
6000W
Fuel
dual-fuel
Run time @50 %
6.5h
Noise
67dB
CO shutoff
Yes
Key features
- Runs on gasoline (6,000 peak / 5,400 running watts) or propane (5,400 peak / 4,600 running watts)
- Outlets: two 120V 5-20R household outlets, one 120V TT-30RV outlet, one 120V/240V 14-50R outlet, plus USB-A and USB-C ports
- Up to 6.5 hours of continuous operation at half load on a 3-gallon tank
- Quiet operation at 67 dB
- Recoil, electric, or remote start
- Parallel capable: connects with another inverter for double the power
- Carbon monoxide detection, low oil shutoff, and overload protection
What it is for
- Emergency home power
- RV use
- Jobsite use
Specifications
| Running watts | 5400 W |
|---|---|
| Peak / surge | 6000 W |
| Fuel | dual-fuel |
| Tank | 11.4 L (3.0 gal) |
| Run time at 50 % load | 6.5 h |
| Noise | 67 dB |
| CO shutoff | Yes |
| AC output voltage | 120V/240V |
From the Pulsar page. Values the manufacturer does not publish are left out.
Similar inverter & portable generators
Honda EM6500SXK2
5500 W, gas
Honda EU7000iS
5500 W, gas
Westinghouse WGen5300c
5300 W, gasoline
Westinghouse WGen5300cv
5300 W, gasoline
Westinghouse WGen5300DF
5300 W, dual-fuel
Westinghouse WGen5300DFc
5300 W, dual-fuel
Yamaha EF6300iSDE
5500 W
Connection and wiring
Follow the diagrams in the Pulsar manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Open the Pulsar manual (PDF) →
Error codes and troubleshooting
We found no error-code table in this manual. Its troubleshooting section is the reference.
FAQ
How long does the Pulsar PGX60BiSRCO run on a tank?
The maker rates it at 6.5 hours at 50 % load (about 2,700 W) on a 3.0-gal tank. A light load such as a refrigerator and lights runs longer; a full load runs shorter.
Can the Pulsar PGX60BiSRCO start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 6000 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.