Westinghouse WGen10500DFc
Generator. Specs from the manufacturer page (checked ).

The Westinghouse WGen10500DFc is a dual fuel portable generator that runs on gasoline or propane (LPG). It produces 10,500 running watts and 13,500 peak watts on gasoline, and 9,500 running and 12,500 peak watts on propane.
Key features
- Gasoline: 10,500 running / 13,500 peak watts; propane: 9,500 running / 12,500 peak watts
- Runs up to 19 hours at 25% load on a 9.5 gal (36 L) gasoline tank; 9.5 hours at 50% on gasoline, 7 hours at 50% on propane
- Outlets: 2 duplex 120V 5-20R, 1 120/240V L14-30R, 1 120/240V 14-50R, ST switch, 2 USB; GFCI outlets with outlet covers
- Starting: push-button electric start, remote key fob, and backup recoil start
- Transfer Switch Ready and ST Switch Ready; can pair with the Westinghouse WATS200 automatic transfer switch (sold separately)
- Safety: automatic low-oil shutdown, carbon monoxide (CO) sensor shutdown, overload protection
- Digital readout (VFT Data Center) shows volt output, frequency, and lifetime hours; built-in fuel gauge
- 3-year limited residential warranty and lifetime technical support
What it is for
- home backup
- jobsite
- travel trailer
Specifications
| Running watts | 10500 W |
|---|---|
| Peak / surge | 13500 W |
| Fuel | dual-fuel |
| Tank | 36 L (9.5 gal) |
| Run time at 50 % load | 9.5 h |
| Noise | 74 dB |
| CO shutoff | Yes |
| AC output voltage | 120/240V |
| Weight | 104.3 kg (229.9 lb) |
| Dimensions | 72.6 × 74.4 × 68.1 cm (28.6 × 29.3 × 26.8 in) |
| Warranty | 3 years |
From the Westinghouse page. Values the manufacturer does not publish are left out.
What is in the box
- Oil bottle
- Oil funnel
- Spark plug wrench
- Remote key fob
- Propane regulator/hose
- 15' natural gas hose
- Battery float charger
- Battery
- Heavy duty never-flat wheels
- Handle
Similar inverter & portable generators
DuroMax XP13000HX
DuroMax XP13000HXT
WEN TF1300iX
Pulsar PGD125TiSRCO
Pulsar G12KBN
Pulsar PG12000B
Champion 11500-Watt Tri Fuel
Connection and wiring
We have not linked an official manual for this model yet; see the Westinghouse page.
Error codes and troubleshooting
We have not found an official code table for this model yet.
FAQ
How long does the Westinghouse WGen10500DFc run on a tank?
The maker rates it at 9.5 hours at 50 % load (about 5,250 W) on a 9.5-gal tank. A light load such as a refrigerator and lights runs longer; a full load runs shorter.
Can the Westinghouse WGen10500DFc start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 13500 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.