Yoshino B330 SST
Power station. Specs from the manufacturer page (checked ).

The Yoshino B330 SST is a 241 Wh portable power station with 330 W output, built on a Li-NCM solid-state battery. The page says it charges to 80% in 90 minutes from 1800W AC and is rated for 4000+ cycles to 80% capacity. The stated safe operating range is 14°F to 140°F.
Key features
- Li-NCM solid-state battery, up to 280 Wh/kg per the page
- 100W bidirectional USB-C: 100W output and 60W input
- 80% in Only 90 Minutes (1800W AC)
- 4000+ charge and discharge cycles to 80% capacity
- Operating range 14°F to 140°F
- 20Ms UPS switchover for emergency power
- The page also lists 2611Wh capacity at 4000W rated output, which conflicts with the 241Wh and 330W headline figures
What it is for
- Home use
- Emergency power supply
Specifications
| Capacity | 241 Wh |
|---|---|
| Continuous output | 330 W |
| Battery chemistry | NMC |
| Cycle life | 4000 cycles |
| AC charging | 80% in Only 90 Minutes (1800W AC) |
From the Yoshino page. Values the manufacturer does not publish are left out.
How long it runs common appliances
| Appliance | Watts | Runs? | Hours |
|---|---|---|---|
| Refrigerator (with freezer) | 120 W (600 start) | surge too high | — |
| Chest freezer | 100 W (500 start) | surge too high | — |
| CPAP (no humidifier) | 35 W (40 start) | yes | 5.5 h |
| Gas boiler (pump + controls) | 120 W (300 start) | yes | 3.2 h |
| Wi-Fi router + modem/ONU | 12 W | yes | 16 h |
| Starlink (standard dish) | 60 W (100 start) | yes | 3.2 h |
| TV 50" | 75 W | yes | 2.5 h |
| Sump pump 1/2 HP | 920 W (2150 start) | surge too high | — |
| Well pump 1/2 HP | 880 W (2000 start) | surge too high | — |
| Space heater 1500 W | 1500 W | surge too high | — |
Assumes 88 % inverter efficiency, 90 % usable capacity and typical duty cycles. Build your own list in the calculator.
Similar portable power stations
Marbero 237Wh 300W Portable Power Station
Togo Power ADVANCE 300B
Aferiy P040 (Nomad400)
Allpowers VOLIX P300
Jackery Explorer 240 v2
Bluetti EB3A
Vtoman Jump 600X
Connection and wiring
Follow the diagrams in the Yoshino manual.
Open the Yoshino manual (PDF) →
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| AC/Solar/Car charging high temperature protection | Charging input is too hot, so charging is protected. | After the product cools down, it will resume normal operation automatically. | 19 |
| AC/USB-C PD/DC output high temperature protection | The product is too hot while supplying AC, USB-C PD, or DC output, so that output is protected. | After the product cools down, re-press the AC/USB/DC power button. It will resume normal operation automatically. | 19 |
| AC/USB-C/USB-C PD/DC output overload protection | The load on an AC, USB-C, USB-C PD, or DC output exceeds the rated power, so that output is protected. | Remove the overloaded device and re-press the AC/USB/DC power button. It will resume normal operation automatically. Use electrical appliances within rated power. | 19 |
| Battery Failure | A battery alarm prompt appears on the LCD during use. It indicates a battery fault. | If the prompt appears and does not disappear after restarting, stop using the product immediately and contact Yoshino customer service. Call service if it persists. | 19 |
| Battery charging high temperature protection | The battery is too hot while charging, so charging is protected. Charging stops during the protection. | Charging can be resumed automatically after the battery cools down. Wait for the battery to cool. | 19 |
| Battery charging low temperature protection | The battery is too cold while charging, so charging is protected. | Charging can be resumed automatically after battery temperature rises above 0°C (32°F). | 19 |
6 of 10 codes. From the Yoshino manual. All 10 B4000 SST / B2000 SST / B660 SST / B330 SST codes →
FAQ
How long will the Yoshino B330 SST run a refrigerator?
About 5 hours for a typical 120 W refrigerator that runs 35 % of the time, after inverter and depth-of-discharge losses.
Can the Yoshino B330 SST start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 330 W output (no separate peak published). That is below a typical 1/2 HP sump pump start (about 2150 W); check your pump label. Use the calculator with your exact pump.