Yoshino B660 SST
Power station. Specs from the manufacturer page (checked ).

The Yoshino B660 SST is a 602 Wh portable power station with 660 W output and a Li-NCM solid-state battery pack. It has nine outlets, including three pure sine wave AC outlets, and the manufacturer says it provides 1–3 days of home backup power.
Key features
- Nine outlets, and up to nine devices can charge at the same time
- Three pure sine wave AC outlets
- Up to 80% in 2.2 hours when a wall outlet and the 100W USB-C PD port charge at the same time
- Other recharge options: AC adapter, car outlet, USB-C PD port, or Yoshino solar panel
- Upgraded MPPT solar charging, with noise as low as 38dB
- Rated for use from 14℉ to 140℉
- Over 4000 cycles to 80% capacity and a 10-year lifespan
- ETL certified to UL2743 and controlled through the Yoshino App over Wi-Fi or Bluetooth
What it is for
- home backup
Specifications
| Capacity | 602 Wh |
|---|---|
| Continuous output | 660 W |
| Battery chemistry | NMC |
| Cycle life | 4000 cycles |
| Weight | 7.67 kg (16.9 lb) |
| Warranty | 5 years |
From the Yoshino page. Values the manufacturer does not publish are left out.
What is in the box
- B660 SST Portable Power Station
- AC to DC Recharge Adapter (4.3ft / 1.3m)
- Cigarette Car Charging Cable (9.8ft / 3m)
- Solar Charging Cable MC4 to XT60 (9.8ft / 3m)
- DC5521 to Cigarette Car Female Output Cable (1.6ft / 0.5m)
- User Manual
How long it runs common appliances
| Appliance | Watts | Runs? | Hours |
|---|---|---|---|
| Refrigerator (with freezer) | 120 W (600 start) | yes | 11 h |
| Chest freezer | 100 W (500 start) | yes | 16 h |
| CPAP (no humidifier) | 35 W (40 start) | yes | 14 h |
| Gas boiler (pump + controls) | 120 W (300 start) | yes | 7.9 h |
| Wi-Fi router + modem/ONU | 12 W | yes | 40 h |
| Starlink (standard dish) | 60 W (100 start) | yes | 7.9 h |
| TV 50" | 75 W | yes | 6.4 h |
| Sump pump 1/2 HP | 920 W (2150 start) | surge too high | — |
| Well pump 1/2 HP | 880 W (2000 start) | surge too high | — |
| Space heater 1500 W | 1500 W | surge too high | — |
Assumes 88 % inverter efficiency, 90 % usable capacity and typical duty cycles. Build your own list in the calculator.
Similar portable power stations
Bluetti AC70
Anker SOLIX C800 Plus
Goal Zero Yeti 500
Westinghouse iGen600s
Bluetti EB70S
Fossibot F800
Bluetti AC60P
Yoshino B660 SST comparisons
- B660 SST vs Goal Zero Yeti 700
- B660 SST vs Bluetti AC70
- B660 SST vs Anker SOLIX C800 Plus
- B660 SST vs Goal Zero Yeti 500
- B660 SST vs Westinghouse iGen600s
- B660 SST vs Bluetti EB70S
All 12 comparisons
Connection and wiring
Follow the diagrams in the Yoshino manual.
Open the Yoshino manual (PDF) →
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| AC/Solar/Car charging high temperature protection | Charging input is too hot, so charging is protected. | After the product cools down, it will resume normal operation automatically. | 19 |
| AC/USB-C PD/DC output high temperature protection | The product is too hot while supplying AC, USB-C PD, or DC output, so that output is protected. | After the product cools down, re-press the AC/USB/DC power button. It will resume normal operation automatically. | 19 |
| AC/USB-C/USB-C PD/DC output overload protection | The load on an AC, USB-C, USB-C PD, or DC output exceeds the rated power, so that output is protected. | Remove the overloaded device and re-press the AC/USB/DC power button. It will resume normal operation automatically. Use electrical appliances within rated power. | 19 |
| Battery Failure | A battery alarm prompt appears on the LCD during use. It indicates a battery fault. | If the prompt appears and does not disappear after restarting, stop using the product immediately and contact Yoshino customer service. Call service if it persists. | 19 |
| Battery charging high temperature protection | The battery is too hot while charging, so charging is protected. Charging stops during the protection. | Charging can be resumed automatically after the battery cools down. Wait for the battery to cool. | 19 |
| Battery charging low temperature protection | The battery is too cold while charging, so charging is protected. | Charging can be resumed automatically after battery temperature rises above 0°C (32°F). | 19 |
6 of 10 codes. From the Yoshino manual. All 10 B4000 SST / B2000 SST / B660 SST / B330 SST codes →
FAQ
How long will the Yoshino B660 SST run a refrigerator?
About 11 hours for a typical 120 W refrigerator that runs 35 % of the time, after inverter and depth-of-discharge losses.
Can the Yoshino B660 SST start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 660 W output (no separate peak published). That is below a typical 1/2 HP sump pump start (about 2150 W); check your pump label. Use the calculator with your exact pump.