BiPAP: how much battery you need1
BiPAP (no humidifier) draws about 60 W (60 W range), runs 100% of the time and uses 480 Wh per day. Start-up surge: 70 W.
Estimate: a bilevel machine draws a little more than a CPAP; the humidifier adds more.
Battery needed
| Hours | Wh | Battery (Wh) | Inverter (W) |
|---|---|---|---|
| For 8 hours | 160 | 243 | 66 / 70 |
| For 24 hours | 480 | 728 | 66 / 70 |
| For 72 hours | 1440 | 2182 | 66 / 70 |
Open in calculator with this appliance →
Stations that fit (24 h)
Shop links are affiliate links: if you buy, we earn a small commission at no cost to you. Picks are based on your numbers, not on commission.
FAQ
How many watts does a BiPAP (no humidifier) use?
Typically 60 W while running, with a range of 60 W depending on model and age. Start-up surge can reach 70 W.
How long will a 1000 Wh power station run a BiPAP (no humidifier)?
About 11 hours on the clock, allowing for the 100% duty cycle, inverter losses and a 20% reserve.
What size power station do I need for a BiPAP (no humidifier) overnight (8 h)?
About 243 Wh of battery and an inverter rated at least 66 W continuous with 70 W surge.
Can I run a BiPAP (no humidifier) on solar during an outage?
You need roughly 320 W of panels in winter to replace a day's use (480 Wh), charging through a station with a big enough MPPT input.
Other appliances
1 Approximate values: estimated from motor or heater power and typical figures published online, not from a manufacturer chart. Check your appliance label.
Inverter efficiency 88%, usable depth of discharge 90%, reserve 20%. Full method: How we calculate.