Oxygen concentrator 5 L/min: how much battery you need
Oxygen concentrator 5 L/min draws about 350 W (300–350 W range), runs 100% of the time and uses 8400 Wh per day. Start-up surge: 600 W.
Philips EverFlo (up to 5 L/min) averages 350 W. Keep a full oxygen cylinder as the backup to the backup.
Battery needed
| Hours | Wh | Battery (Wh) | Inverter (W) |
|---|---|---|---|
| For 8 hours | 2800 | 4243 | 386 / 600 |
| For 24 hours | 8400 | 12728 | 386 / 600 |
| For 72 hours | 25200 | 38182 | 386 / 600 |
Open in calculator with this appliance →
Stations that fit (24 h)
Shop links are affiliate links: if you buy, we earn a small commission at no cost to you. Picks are based on your numbers, not on commission.
FAQ
How many watts does a Oxygen concentrator 5 L/min use?
Typically 350 W while running, with a range of 300–350 W depending on model and age. Start-up surge can reach 600 W.
How long will a 1000 Wh power station run a Oxygen concentrator 5 L/min?
About 1.9 hours on the clock, allowing for the 100% duty cycle, inverter losses and a 20% reserve.
What size power station do I need for a Oxygen concentrator 5 L/min overnight (8 h)?
About 4243 Wh of battery and an inverter rated at least 386 W continuous with 600 W surge.
Can I run a Oxygen concentrator 5 L/min on solar during an outage?
You need roughly 5600 W of panels in winter to replace a day's use (8400 Wh), charging through a station with a big enough MPPT input.
Other sizes
Other appliances
1 Approximate values: estimated from motor or heater power and typical figures published online, not from a manufacturer chart. Check your appliance label.
Inverter efficiency 88%, usable depth of discharge 90%, reserve 20%. Full method: How we calculate. source