Blackout Sizer Calculator
EN

Dehumidifier 35 pint: how much battery you need1

Dehumidifier 35 pint draws about 350 W (350 W range), runs 60% of the time and uses 2520 Wh per day. Start-up surge: 900 W.

Estimate for a 35-pint-per-day unit; the compressor cycles with the humidistat.

Battery needed

HoursWhBattery (Wh)Inverter (W)
For 8 hours8401273386 / 900
For 24 hours25203819386 / 900
For 72 hours756011455386 / 900

Open in calculator with this appliance →

Stations that fit (24 h)

Westinghouse iGen160s
155 Wh · 100 W (150 W peak)
→
Bluetti Elite 400
3840 Wh · 2600 W (3900 W peak)
→
Anker SOLIX F3800
3840 Wh · 6000 W (6000 W peak)
→

Shop links are affiliate links: if you buy, we earn a small commission at no cost to you. Picks are based on your numbers, not on commission.

FAQ

How many watts does a Dehumidifier 35 pint use?

Typically 350 W while running, with a range of 350 W depending on model and age. Start-up surge can reach 900 W.

How long will a 1000 Wh power station run a Dehumidifier 35 pint?

About 3.1 hours on the clock, allowing for the 60% duty cycle, inverter losses and a 20% reserve.

What size power station do I need for a Dehumidifier 35 pint overnight (8 h)?

About 1273 Wh of battery and an inverter rated at least 386 W continuous with 900 W surge.

Can I run a Dehumidifier 35 pint on solar during an outage?

You need roughly 1680 W of panels in winter to replace a day's use (2520 Wh), charging through a station with a big enough MPPT input.

Other sizes

50 pint500 W1

Other appliances

Window AC 5,000 BTU520 WWindow AC 8,000 BTU750 W1Window AC 10,000 BTU1050 WAir conditioner 12k BTU (inverter)1000 WElectric blanket60 WSpace heater 1500 W1500 WCentral AC 2-ton2250 WCentral AC 3-ton3250 W

1 Approximate values: estimated from motor or heater power and typical figures published online, not from a manufacturer chart. Check your appliance label.

Inverter efficiency 88%, usable depth of discharge 90%, reserve 20%. Full method: How we calculate.