Pecron E2400LFP / E1500LFP error codes
2 codes from the official Pecron manual (E1500 LFP), each with the manual page.
Applies to: Pecron E2400LFP, Pecron E1500LFP.
| Code | What it means | What to do | Service | Manual |
|---|---|---|---|---|
| AC Overload Alarm | The AC overload alarm icon flashes when connected devices draw more than 2200 W. The unit stops supplying AC power. | Keep AC loads under 2200 W, since the unit can power most devices below that consumption. Reduce or disconnect the excess load. The page does not give further steps. | owner | p. 5 |
| Temperature Alarm | The high-temperature alarm icon flashes after long high-power output in hot conditions, indicating the inverter is overheated. AC output is turned off. | The page gives no explicit remedy. The operating range is -20 to 45°C, so keep the unit within that range. Allow it to cool before resuming use. | owner | p. 5 |
Source: official Pecron manual, read 2026-11-01. "Owner" means the manual lists steps you can take; "dealer" means it directs you to authorized service. Fuel, gas and electrical work on generators is for qualified technicians; follow the manual's safety section.