Blackout Sizer Calculator
EN
Home›Portable Power Stations›Bluetti›AC200PL

Bluetti AC200PL

Power station. Specs from the manufacturer page (checked ).

Bluetti AC200PL
Photo: Bluetti

The AC200PL is a 2304 Wh portable power station with 2400 W rated AC output. It uses a LiFePO4 battery rated for 3000+ cycles and can be controlled through the BLUETTI App over Bluetooth or WiFi.

Check on Amazon →Sponsored link; we may earn a commission.
Capacity
2304Wh
Continuous
2400W
Solar input
1200W
Chemistry
LiFePO4
Cycles
3000
Expandable
Yes
Weight
27.9kg

Key features

What it is for

Specifications

Capacity2304 Wh
Continuous output2400 W
Solar input1200 W
ExpandableYes
Battery chemistryLiFePO4
Cycle life3000 cycles
AC output voltage120V
Weight27.9 kg (61.5 lb)
Dimensions41.9 × 27.9 × 36.6 cm (16.5 × 11.0 × 14.4 in)

From the Bluetti page. Values the manufacturer does not publish are left out.

How long it runs common appliances

ApplianceWattsRuns?Hours
Refrigerator (with freezer)120 W (600 start)yes43 h
Chest freezer100 W (500 start)yes61 h
CPAP (no humidifier)35 W (40 start)yes52 h
Gas boiler (pump + controls)120 W (300 start)yes30 h
Wi-Fi router + modem/ONU12 Wyes6.3 days
Starlink (standard dish)60 W (100 start)yes30 h
TV 50"75 Wyes24 h
Sump pump 1/2 HP920 W (2150 start)yes2.0 h
Well pump 1/2 HP880 W (2000 start)yes2.1 h
Space heater 1500 W1500 Wyes1.7 h

Assumes 88 % inverter efficiency, 90 % usable capacity and typical duty cycles. Build your own list in the calculator.

Similar portable power stations

Bluetti AC200PL comparisons

All 25 comparisons

All Bluetti models →

Connection and wiring

Follow the diagrams in the Bluetti manual.

Open the Bluetti manual (PDF) →

Error codes and troubleshooting

CodeMeaningWhat to doManual page
E004The output voltage is outside the expected range, or the grid connection is not proper.Ensure the output voltage is within ±10% of the rated voltage or proper grid connection.21
E016The internal fan is blocked, unplugged, or not functioning properly.Check if the fan is blocked, unplugged, or not functioning properly. Ensure proper ventilation.21
E117Grid oscillation has been detected at the grid input.Disconnect the grid input and contact BLUETTI support for further assistance. Call service if it persists.21
E074The battery management system (BMS) has detected a fault. The specific fault is shown in the mobile app.Check the specific fault in the mobile app. If the battery is too hot or too cold, let the unit reach a suitable temperature before charging or using it (charging -15°C to 40°C; discharging -25°C to 40°C).22
OthersOther errors not listed in the error code table.Contact BLUETTI support for help. Call service if it persists.22
E001The inverter is overloaded because the connected devices draw too much power.Check whether the power consumption of your devices is too high. Reduce the load if necessary.23

6 of 23 codes. From the Bluetti manual. All 23 Elite 200 V2 / Apex 300 / Elite 100 V2 / AC70 codes →

FAQ

How long will the Bluetti AC200PL run a refrigerator?

About 43 hours for a typical 120 W refrigerator that runs 35 % of the time, after inverter and depth-of-discharge losses.

Can the Bluetti AC200PL start a sump pump or well pump?

Starting surge matters more than running watts: this unit is rated 2400 W output (no separate peak published). That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.

Bluetti AC200PLCheck on Amazon