Anker SOLIX C1000 Gen 2
1024 Wh, 2000 W
Bluetti Elite 100 V2
Power station. Specs from the manufacturer page (checked ).
The Bluetti Elite 100 V2 is a 1,024 Wh portable power station with 1,800 W output and 2,700 W lifting power, built on LiFePO₄ cells rated for over 4,000 cycles. It weighs 11.5 kg (25 lbs) and recharges to 80% in 45 minutes from AC.
Check on Amazon →Sponsored link; we may earn a commission.
Capacity
1024Wh
Continuous
1800W
Peak / surge
2700W
Solar input
1000W
Chemistry
LiFePO4
Cycles
4000
Weight
11.5kg
Key features
- 11 ports for running appliances, rated at 1,800 W output with 2,700 W lifting power
- Reaches 80% in 45 mins with 1,200W AC TurboBoost charging
- Solar input up to 1,000 W with built-in MPPT, full charge in 70 mins
- Car charging is stated as 6× faster than standard car chargers
- UPS switchover in 10 ms for sensitive devices
- Rated 4,000+ cycles to 80% original capacity
- Operates at 30 dB under light loads
- WiFi/Bluetooth connectivity with the BLUETTI App, including low-battery and full-charge alerts and Power Memory Mode
What it is for
- Home backup during power outages
- Camping
- RV power
- Travel
Specifications
| Capacity | 1024 Wh |
|---|---|
| Continuous output | 1800 W |
| Peak / surge | 2700 W |
| Solar input | 1000 W |
| Battery chemistry | LiFePO4 |
| Cycle life | 4000 cycles |
| Noise | 30 dB |
| AC charging | Reaches 80% in 45 mins |
| AC output voltage | 120V |
| Weight | 11.5 kg (25.4 lb) |
| Dimensions | 32 × 21.5 × 25 cm (12.6 × 8.5 × 9.8 in) |
From the Bluetti page. Values the manufacturer does not publish are left out.
What is in the box
- Elite 100 V2 x1
- User Manual x1
- Grounding Screw x1
How long it runs common appliances
| Appliance | Watts | Runs? | Hours |
|---|---|---|---|
| Refrigerator (with freezer) | 120 W (600 start) | yes | 19 h |
| Chest freezer | 100 W (500 start) | yes | 27 h |
| CPAP (no humidifier) | 35 W (40 start) | yes | 23 h |
| Gas boiler (pump + controls) | 120 W (300 start) | yes | 14 h |
| Wi-Fi router + modem/ONU | 12 W | yes | 68 h |
| Starlink (standard dish) | 60 W (100 start) | yes | 14 h |
| TV 50" | 75 W | yes | 11 h |
| Sump pump 1/2 HP | 920 W (2150 start) | yes | 0.9 h |
| Well pump 1/2 HP | 880 W (2000 start) | yes | 0.9 h |
| Space heater 1500 W | 1500 W | yes | 0.8 h |
Assumes 88 % inverter efficiency, 90 % usable capacity and typical duty cycles. Build your own list in the calculator.
Similar portable power stations
EcoFlow DELTA 3 Plus
1024 Wh, 1800 W
Jackery Explorer 1000 Plus
1264 Wh, 2000 W
EcoFlow DELTA 3
1024 Wh, 1800 W
Anker SOLIX C800 Plus
768 Wh, 1200 W
Generac GB1000
1086 Wh, 1600 W
EcoFlow DELTA 2
1024 Wh, 1800 W
Westinghouse iGen1000s
1008 Wh, 1500 W
Bluetti Elite 100 V2 comparisons
- Elite 100 V2 vs Anker SOLIX C1000 Gen 2
- Elite 100 V2 vs EcoFlow DELTA 3 Plus
- Elite 100 V2 vs Jackery Explorer 1000 Plus
- Elite 100 V2 vs EcoFlow DELTA 3
- Elite 100 V2 vs Anker SOLIX C800 Plus
- Elite 100 V2 vs Generac GB1000
All 19 comparisons
- Elite 100 V2 vs EcoFlow DELTA 2
- Elite 100 V2 vs Westinghouse iGen1000s
- Elite 100 V2 vs Vtoman FlashSpeed 1000
- Elite 100 V2 vs Allpowers R1500 LITE
- Elite 100 V2 vs Pecron E1000LFP
- Elite 100 V2 vs Firman Zero E (E201001)
- Elite 100 V2 vs Vtoman Jump 1500X
- Elite 100 V2 vs Dabbsson 1000L
- Elite 100 V2 vs Dabbsson 600L
- Elite 100 V2 vs EcoFlow RIVER 2 Pro
- Elite 100 V2 vs Yoshino B2000 SST
- Elite 100 V2 vs Anker SOLIX C1000
- Elite 100 V2 vs Allpowers P1800
On our lists
Best power stations for a CPAPBest power stations for StarlinkBest lightweight power stations (under 30 lb)Best LiFePO4 power stationsBest power stations for solar charging
Connection and wiring
Follow the diagrams in the Bluetti manual.
Open the Bluetti manual (PDF) →
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| E004 | The output voltage is outside the expected range, or the grid connection is not proper. | Ensure the output voltage is within ±10% of the rated voltage or proper grid connection. | 21 |
| E016 | The internal fan is blocked, unplugged, or not functioning properly. | Check if the fan is blocked, unplugged, or not functioning properly. Ensure proper ventilation. | 21 |
| E117 | Grid oscillation has been detected at the grid input. | Disconnect the grid input and contact BLUETTI support for further assistance. Call service if it persists. | 21 |
| E074 | The battery management system (BMS) has detected a fault. The specific fault is shown in the mobile app. | Check the specific fault in the mobile app. If the battery is too hot or too cold, let the unit reach a suitable temperature before charging or using it (charging -15°C to 40°C; discharging -25°C to 40°C). | 22 |
| Others | Other errors not listed in the error code table. | Contact BLUETTI support for help. Call service if it persists. | 22 |
| E001 | The inverter is overloaded because the connected devices draw too much power. | Check whether the power consumption of your devices is too high. Reduce the load if necessary. | 23 |
6 of 23 codes. From the Bluetti manual. All 23 Elite 200 V2 / Apex 300 / Elite 100 V2 / AC70 codes →
FAQ
How long will the Bluetti Elite 100 V2 run a refrigerator?
About 19 hours for a typical 120 W refrigerator that runs 35 % of the time, after inverter and depth-of-discharge losses.
Can the Bluetti Elite 100 V2 start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 2700 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.