WEN DF8000X
6500 W, dual-fuel
Firman P06702
Generator · FIRMAN Max Pro. Specs from the manufacturer page (checked ).
The Firman P06702 is a portable inverter generator with 8375 starting watts and 6700 running watts at 120/240V. It is powered by a 389cc Firman Max Pro Series engine.
View at Firman →Sponsored link; we may earn a commission.
Running
6700W
Peak / surge
8375W
CO shutoff
Yes
Key features
- 8375 starting watts and 6700 running watts
- 120/240V output
- 389cc FIRMAN Max Pro Series engine with Phoenix Fat Head Block cooling
- 4-in-1 Data Minder monitors volts, hertz, hours, and low oil levels
- CO Alert automatically shuts the unit down if carbon monoxide builds up
- Low oil shut-off protection
- Rugged roll cage frame, 10" heavy-duty wheels, and high leverage folding handle
What it is for
- Home backup power
- Jobsite tools
Specifications
| Running watts | 6700 W |
|---|---|
| Peak / surge | 8375 W |
| CO shutoff | Yes |
| AC output voltage | 120/240V |
From the Firman page. Values the manufacturer does not publish are left out.
What is in the box
- Engine oil
- Funnel
- Operator's manual
- Spark plug wrench
- Generator cover
- 25-foot power cord (L14-30P to 4x5-20R)
Similar inverter & portable generators
Briggs & Stratton 7000 Watt Elite Series
7000 W, gasoline
Champion 8500-Watt Dual Fuel Inverter (201175)
7000 W, dual-fuel
WEN DF875iX
7000 W, dual-fuel
WEN GN875iX
7000 W, gasoline
Pulsar PG7600BiSRCO
6300 W, dual-fuel
Champion 9000-Watt Tri Fuel Inverter (201176)
7250 W, tri-fuel
A-iPower GXS7600iRD
6100 W, dual-fuel
Connection and wiring
Follow the diagrams in the Firman manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
- Wiring diagram, manual page 2 →
- Wiring diagram, manual page 32 →
- Wiring diagram, manual page 33 →
- Wiring diagram, manual page 34 →
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| Circuit Breakers | The receptacles are protected by an AC circuit protector that trips if the generator is overloaded or an external short circuit occurs. | Disconnect all electrical loads and determine the cause before using the generator again. If overloading caused the trip, reduce the load. Reset by pressing the protector button. Continuous tripping may damage the generator or equipment. | 8 |
| Oil Warning Indicator Light | Indicates the oil has fallen below the minimum level. The engine stops automatically and will not start until the proper amount of oil is in the crankcase. | Check the oil level when this light turns on. Add the proper amount of engine oil to the crankcase before attempting to start the engine. | 8 |
| Overload Indicator Light | Connected devices have exceeded the generator's wattage or amperage capacity, or a power surge occurred. The AC Power light goes off, the engine keeps running, and power to the receptacles is cut. | Keep the total power drawn from all receptacles within the nameplate rating. | 8 |
| Circuit Breaker | The receptacles are protected by an AC circuit protector that trips if the generator is overloaded or an external short circuit occurs. | Disconnect all electrical loads and find the cause before using the generator again. If overloading caused the trip, reduce the load. Reset by pressing the button on the protector. Continuous tripping may damage the generator or equipment. | 9 |
| Output Ready | Stays on during normal operation. Turns off when the generator is overloaded. | — | 9 |
| AC Reset | The inverter has entered a protective state and AC output is interrupted. | Press the AC Reset Button to restore the output. | 12 |
6 of 13 codes. From the Firman manual. All 13 WH03242 / T09371 / H07553 / W03083 codes →
FAQ
Can the Firman P06702 start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 8375 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.