A-iPower AP3700i
3200 W, gasoline
Firman WH03342
Generator. Specs from the manufacturer page (checked ).
The Firman WH03342 is a dual-fuel inverter generator rated at 3300 W running and 4125 W starting on gasoline, or 3000 W running and 3750 W starting on LPG. It has a 193cc engine, a 1.8-gallon gas tank, and up to 9 hours of run time at 50% load.
View at Firman →Sponsored link; we may earn a commission.
Running
3300W
Peak / surge
4125W
Fuel
dual-fuel
Run time @50 %
9h
Weight
40.8kg
Warranty
4yr
Key features
- 193cc Max Pro series engine with recoil start and electric start
- Running watts 3300W on gas and 3000W on LPG; starting watts 4125W on gas and 3750W on LPG
- Outlets: one 5-20R 120V 20A duplex, one TT-30R 120V 30A twistlock (27.5A/120V/3300W), one USB-A (2.1A/5V DC/10W), one 12V DC port (8.3A/12V DC/100W)
- Low oil shut off and new CO alert technology
- 1.8-gallon gas tank; up to 9 hours of run time at 50% load
- 58dB at 1/4 load
- Weight: 90 lbs
- 4-year warranty
Specifications
| Running watts | 3300 W |
|---|---|
| Peak / surge | 4125 W |
| Fuel | dual-fuel |
| Tank | 6.8 L (1.8 gal) |
| Run time at 50 % load | 9 h |
| AC output voltage | 120 volts |
| Weight | 40.8 kg (89.9 lb) |
| Warranty | 4 years |
From the Firman page. Values the manufacturer does not publish are left out.
Similar inverter & portable generators
EcoFlow Smart Generator (Dual Fuel)
3200 W, dual-fuel
GenMax GM3500iAED
3200 W, dual-fuel
GenMax GM3500Xi
3200 W
PowerSmart 4000W Inverter Generator
3200 W
PowerSmart DB5068
3200 W
Pulsar GD400BN
3200 W, dual-fuel
Pulsar PGD40iSCO
3200 W, gasoline
Connection and wiring
Follow the diagrams in the Firman manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| Circuit Breakers | The receptacles are protected by an AC circuit protector that trips if the generator is overloaded or an external short circuit occurs. | Disconnect all electrical loads and determine the cause before using the generator again. If overloading caused the trip, reduce the load. Reset by pressing the protector button. Continuous tripping may damage the generator or equipment. | 8 |
| Oil Warning Indicator Light | Indicates the oil has fallen below the minimum level. The engine stops automatically and will not start until the proper amount of oil is in the crankcase. | Check the oil level when this light turns on. Add the proper amount of engine oil to the crankcase before attempting to start the engine. | 8 |
| Overload Indicator Light | Connected devices have exceeded the generator's wattage or amperage capacity, or a power surge occurred. The AC Power light goes off, the engine keeps running, and power to the receptacles is cut. | Keep the total power drawn from all receptacles within the nameplate rating. | 8 |
| Circuit Breaker | The receptacles are protected by an AC circuit protector that trips if the generator is overloaded or an external short circuit occurs. | Disconnect all electrical loads and find the cause before using the generator again. If overloading caused the trip, reduce the load. Reset by pressing the button on the protector. Continuous tripping may damage the generator or equipment. | 9 |
| Output Ready | Stays on during normal operation. Turns off when the generator is overloaded. | — | 9 |
| AC Reset | The inverter has entered a protective state and AC output is interrupted. | Press the AC Reset Button to restore the output. | 12 |
6 of 13 codes. From the Firman manual. All 13 WH03242 / T09371 / H07553 / W03083 codes →
FAQ
How long does the Firman WH03342 run on a tank?
The maker rates it at 9 hours at 50 % load (about 1,650 W) on a 1.8-gal tank. A light load such as a refrigerator and lights runs longer; a full load runs shorter.
Can the Firman WH03342 start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 4125 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.