Champion aXis 22kW
22000 W, dual-fuel
Generac Guardian 26kW
Standby generator. Specs from the manufacturer page (checked ).
The Generac Guardian 26kW is a standby generator with 26,000 W (26 kW) running output on liquid propane, and 24 kW rated maximum continuous power on natural gas. It has built-in cellular connectivity for remote monitoring and control through Mobile Link, and comes with a 5-year limited warranty.
Check on Amazon →Sponsored link; we may earn a commission.
Running
26000W
Fuel
dual-fuel
Weight
238kg
Warranty
5yr
Key features
- Rated maximum continuous power: 26 kW on liquid propane, 24 kW on natural gas
- Runs on liquid propane or natural gas
- Electronic fuel and ignition control, stated as more cost-efficient and lower emission than Generac Guardian Series standby generators on average
- Built-in cellular connectivity for monitoring and control via Mobile Link, with real-time updates and maintenance alerts (some features require a Mobile Link premium subscription)
- Remote diagnostics to help detect issues before they become a problem
- Oil level sensors and improved cold start performance in cold climates
- Sloped roof and rear air intake to reduce risk of snow and ice intrusion
- Compatible with ecobee by Generac thermostats and Generac PWRcell battery systems
What it is for
- home backup
Specifications
| Running watts | 26000 W |
|---|---|
| Fuel | dual-fuel |
| Weight | 238 kg (524.7 lb) |
| Dimensions | 117.9 × 66.8 × 78 cm (46.4 × 26.3 × 30.7 in) |
| Warranty | 5 years |
From the Generac page. Values the manufacturer does not publish are left out.
Similar standby generators
Champion 22 kW fleX Home Standby (201016)
22000 W, dual-fuel
Generac Guardian 24kW
24000 W, dual-fuel
Generac Guardian 22kW
22000 W, dual-fuel
Briggs & Stratton PowerProtect 26kW
26000 W, dual-fuel
Briggs & Stratton PowerProtect+ DX 26kW
26000 W, dual-fuel
Champion 26 kW fleX Home Standby (201614)
26000 W, dual-fuel
Briggs & Stratton PowerProtect 22kW
22000 W, dual-fuel
Generac Guardian 26kW comparisons
On our lists
Connection and wiring
Follow the diagrams in the Generac manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Open the Generac manual (PDF) →
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| Auxiliary Shutdown | Active alarm that must be cleared before the generator can start. | Verify the controller-face emergency shutdown switch is ON (I). Clear the alarm. If equipped, the rocker switch must be set to ON (I) to clear it. | 17 |
| Overcrank | Fault during initial startup. The generator may exceed the normal number of start attempts because air accumulated in the fuel system during installation. | Reset the alarm and restart up to two more times, if necessary. If the unit still fails to start, contact an IASD for assistance. Call service if it persists. | 19 |
| Battery Problem | Listed as a warning. Warnings do not disable the unit or require immediate correction. No specific description given. | Unless correctly trained to correct and clear warnings, contact an IASD or trained service technician. To clear the message, press OFF on the controller, then ENTER. Call service if it persists. | 26 |
| Canbus Error | Listed as a warning. Warnings alert the operator to conditions that do not disable the unit or require immediate correction. No specific description given. | Unless correctly trained to correct and clear warnings, contact an IASD or trained service technician. To clear the message, press OFF on the controller, then ENTER. Call service if it persists. | 26 |
| Charger Missing AC | Listed as a warning. Warnings do not disable the unit or require immediate correction. No specific description given. | Unless correctly trained to correct and clear warnings, contact an IASD or trained service technician. To clear the message, press OFF on the controller, then ENTER. Call service if it persists. | 26 |
| Charger Warning | Listed as a warning. Warnings do not disable the unit or require immediate correction. The manual notes a warning appears when the battery requires service. | Unless correctly trained to correct and clear warnings, contact an IASD or trained service technician. To clear the message, press OFF on the controller, then ENTER. Call service if it persists. | 26 |
6 of 55 codes. From the Generac manual. All 55 Guardian 24kW / Guardian 22kW / Guardian 26kW / Guardian 18kW codes →
FAQ
Can the Generac Guardian 26kW start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 26000 W output (no separate peak published). That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.