Generac Protector 15kW Diesel (RD01525)
Standby generator · Protector Series. Specs from the manufacturer page (checked ).

The Generac Protector 15kW Diesel (RD01525) is a diesel standby generator with 15,000 W running output and a 2.5 L engine. The page describes it as an automatic standby generator that restores power within seconds of an outage. It includes an Evolution controller, Mobile Link Wi-Fi monitoring, and a 5-year limited warranty.
Key features
- 15,000 W running output
- 2.5 L engine, diesel fuel, 6.5 L (6.87 qt) oil capacity
- Evolution controller with a multilingual two-line LCD and color-coded, backlit buttons
- Quiet-Test mode runs the weekly self-test at a lower, quieter RPM
- Mobile Link Wi-Fi monitoring from a smartphone, tablet, or PC; standard on RD diesel models
- Isochronous governor with voltage regulation of +/- 1% and frequency regulation
- UL/CUL 142-listed double-walled base tank and UL/CUL 2200-listed generator
- Available in single- and three-phase configurations
What it is for
- residential standby backup power
- light commercial use
Specifications
| Running watts | 15000 W |
|---|---|
| Fuel | diesel |
| Weight | 693.3 kg (1528.5 lb) |
| Dimensions | 205.7 × 78.7 × 129.5 cm (81.0 × 31.0 × 51.0 in) |
| Warranty | 5 years |
From the Generac page. Values the manufacturer does not publish are left out.
Similar standby generators
Champion 12.5kW Home Standby (100179)
Generac EcoGen 15kW
Generac Guardian 18kW
Briggs & Stratton PowerProtect 13kW
Briggs & Stratton PowerProtect DX 13kW
Briggs & Stratton PowerProtect+ 18kW
Briggs & Stratton PowerProtect+ DX 18kW
Connection and wiring
Follow the diagrams in the Generac manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Open the Generac manual (PDF) →
Error codes and troubleshooting
We found no error-code table in this manual. Its troubleshooting section is the reference.
FAQ
Can the Generac Protector 15kW Diesel (RD01525) start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 15000 W output (no separate peak published). That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.