Champion 12.5kW Home Standby (100179)
12500 W, dual-fuel
Briggs & Stratton PowerProtect DX 13kW
Standby generator · PowerProtect DX. Specs from the manufacturer page (checked ).
The PowerProtect DX 13kW is a home standby generator with 13 kW running output on liquid propane and 11.5 kW on natural gas, plus 37 kVA of motor starting capability. It runs on either liquid propane or natural gas and provides 120 / 240 V output through a 70 A circuit breaker. The manufacturer positions it to provide power during a power outage.
View at Briggs & Stratton →Sponsored link; we may earn a commission.
Running
13000W
Fuel
dual-fuel
Weight
142.9kg
Warranty
10yr
Key features
- Running output of 13 kW on liquid propane and 11.5 kW on natural gas
- 37 kVA motor starting capability
- Approved for installation as close as 18 inches to a building
- Hookups for both liquid propane and natural gas
- Vanguard commercial-grade engine, 627 cc displacement
- Eco-Cise weekly test mode runs for 16 seconds
- Optional Symphony Choice Power Management to prioritize loads
- EnergyTrak app for remote status monitoring (subscription required)
What it is for
- Home backup power during outages
Specifications
| Running watts | 13000 W |
|---|---|
| Fuel | dual-fuel |
| Weight | 142.9 kg (315.0 lb) |
| Dimensions | 72.4 × 64.8 × 95.5 cm (28.5 × 25.5 × 37.6 in) |
| Warranty | 10 years |
From the Briggs & Stratton page. Values the manufacturer does not publish are left out.
Similar standby generators
Champion aXis 14kW
14000 W, dual-fuel
Generac EcoGen 15kW
15000 W, dual-fuel
Generac Guardian 10kW
10000 W, dual-fuel
Generac Guardian 18kW
18000 W, dual-fuel
Generac Guardian 14kW
14000 W, dual-fuel
Generac Protector 15kW Diesel (RD01525)
15000 W, diesel
Generac Guardian 16kW
16000 W, dual-fuel
All Briggs & Stratton models →
Connection and wiring
We have not linked an official manual for this model yet; see the Briggs & Stratton page.
Error codes and troubleshooting
We have not found an official code table for this model yet.
FAQ
Can the Briggs & Stratton PowerProtect DX 13kW start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 13000 W output (no separate peak published). That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.