A-iPower SUA1500i
1200 W, gasoline
Pulsar PG1202SA
Generator. Specs from the manufacturer page (checked ).
The Pulsar PG1202SA is a gasoline-powered portable inverter generator rated at 900 running watts and 1,200 peak watts. It has a 69cc, 2HP air-cooled 2-stroke engine with a recoil start and a 1.1-gallon fuel tank. It provides two 120V AC outlets and one 12V DC outlet.
Check on Amazon →Sponsored link; we may earn a commission.
Running
900W
Peak / surge
1200W
Fuel
gasoline
Run time @50 %
5h
Weight
15.88kg
Key features
- 1,200 peak watts and 900 running watts
- 69cc, 2HP air-cooled 2-stroke engine
- 1.1-gallon tank provides up to 5 hours of runtime at 50% load
- Recoil start system
- Two 120V AC outlets and one 12V DC outlet
- Uses a 30:1 gas-to-oil mix; no oil changes
- Weighs 35 lbs with a built-in handle
What it is for
- Campers
- DIYers
- Tailgaters
- Outdoor enthusiasts
Specifications
| Running watts | 900 W |
|---|---|
| Peak / surge | 1200 W |
| Fuel | gasoline |
| Tank | 4.16 L (1.1 gal) |
| Run time at 50 % load | 5 h |
| AC output voltage | 120V |
| Weight | 15.88 kg (35.0 lb) |
From the Pulsar page. Values the manufacturer does not publish are left out.
What is in the box
- Cable for 12V DC battery charging
Similar inverter & portable generators
Pulsar PGD16iSCO
1200 W
Westinghouse iGen1500c
1000 W, gasoline
Predator 1400 Watt Super Quiet Inverter with CO Secure
1100 W, gasoline
A-iPower GXS1500i
1200 W, gasoline
Champion 1200-Watt (201285)
1200 W, gasoline
Firman P01204
1200 W, gasoline
Pulsar PG1500iS
1200 W, gasoline
Pulsar PG1202SA comparisons
Connection and wiring
Follow the diagrams in the Pulsar manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Open the Pulsar manual (PDF) →
Error codes and troubleshooting
We found no error-code table in this manual. Its troubleshooting section is the reference.
FAQ
How long does the Pulsar PG1202SA run on a tank?
The maker rates it at 5 hours at 50 % load (about 450 W) on a 1.1-gal tank. A light load such as a refrigerator and lights runs longer; a full load runs shorter.
Can the Pulsar PG1202SA start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 1200 W peak. That is below a typical 1/2 HP sump pump start (about 2150 W); check your pump label. Use the calculator with your exact pump.