WEN GN625iX
Generator · GN. Specs from the manufacturer page (checked ).

The WEN GN625iX is a gasoline open frame inverter generator with a 301cc 4-stroke OHV engine, rated at 5000 watts with 6250 surge watts. It has 120V/240V outlets, including a transfer-switch-ready NEMA L14-30R receptacle. It runs up to 8.1 hours at half load and includes a WEN Watchdog CO Shutdown Sensor that turns the generator off if dangerous carbon monoxide levels are detected.
Key features
- 301cc 4-stroke OHV engine producing 5000 rated watts and 6250 surge watts
- Inverter output designed to mirror a pure sine wave, with total harmonic distortion under 0.5% at no load and under 1.5% at full load
- Four 120V NEMA 5-20R receptacles, two 5V USB ports, one 120V/240V NEMA L14-30R twist lock receptacle, and one 120V TT-30R receptacle
- Up to 8.1 hours of run time at half load
- WEN Watchdog CO Shutdown Sensor that automatically turns off the generator if dangerous carbon monoxide levels are detected
- Eco-mode switch that adjusts fuel consumption to the load plugged into the panel
- Panel data meter that monitors voltage, frequency, total runtime, and session runtime
- Low-oil shutdown and built-in overload protection with indicator lights
What it is for
- Home backup during power outages
- RV use
Specifications
| Running watts | 5000 W |
|---|---|
| Peak / surge | 6250 W |
| Fuel | gasoline |
| Tank | 7.6 L (2.0 gal) |
| Run time at 50 % load | 8.1 h |
| CO shutoff | Yes |
| AC output voltage | 120V/240V |
| Warranty | 2 years |
From the WEN page. Values the manufacturer does not publish are left out.
What is in the box
- Wheel and handle kit
Similar inverter & portable generators
Honda EU7000iS
Champion 5500-Watt Dual Fuel
Champion 5500-Watt Dual Fuel Inverter
Yamaha EF6300iSDE
GenMax GM5500i
GenMax GM6000iED
Westinghouse WGen5300c
WEN GN625iX comparisons
- GN625iX vs Generac iQ5200
- GN625iX vs Honda EU7000iS
- GN625iX vs Champion 5500-Watt Dual Fuel
- GN625iX vs Champion 5500-Watt Dual Fuel Inverter
- GN625iX vs Yamaha EF6300iSDE
Connection and wiring
Follow the diagrams in the WEN manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| Overload | Generator was overloaded by too much drawn wattage. The overload reset button activates and cuts output within 3 to 16 seconds, depending on load. | Turn off and disconnect electrical devices until the overload light turns off. Wait about five minutes, then press the activated reset button. If no power after reset, turn off and disconnect all devices and restart the generator. | 23 |
| Flashes 1x | Voltage at the alternator is too low. There is no electrical output. | Check for loose connections. Call 1-800-232-1195 for assistance. Call service if it persists. | 24 |
| Flashes 2x | Engine speed is too low. There is no electrical output. | Check carburetor and stepper motor. Ensure Eco-Mode is OFF. Have the generator serviced; call 1-800-232-1195 for assistance. Call service if it persists. | 24 |
| Flashes 3x | Inverter temperature is too high. There is no electrical output. | Turn the generator off and let it cool fully for 1 to 2 hours before restarting. | 24 |
| Flashes 5x | Voltage at the alternator is too high. There is no electrical output. | Have the generator serviced; call 1-800-232-1195 for assistance. Call service if it persists. | 24 |
| Flashes 6x | Generator exceeded rated output and cut off power to protect itself. There is no electrical output. | Turn OFF and disconnect loads. Press the RESET button on the panel. Reduce the load on the generator. | 24 |
6 of 7 codes. From the WEN manual. All 7 DF875iX / DF402iX / GN875iX / GN625iX codes →
FAQ
How long does the WEN GN625iX run on a tank?
The maker rates it at 8.1 hours at 50 % load (about 2,500 W) on a 2.0-gal tank. A light load such as a refrigerator and lights runs longer; a full load runs shorter.
Can the WEN GN625iX start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 6250 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.