DuroMax XP9500iH
7600 W, dual-fuel
Westinghouse ecoGen10000
Generator. Specs from the manufacturer page (checked ).
The Westinghouse ecoGen10000 is a gasoline-powered portable inverter generator rated at 7,600 running watts and 10,000 peak watts. It runs for up to 12 hours at 25% load on a 5.28 gallon (20 L) fuel tank. It includes a carbon monoxide sensor with automatic shutdown.
View at Westinghouse →Sponsored link; we may earn a commission.
Running
7600W
Peak / surge
10000W
Fuel
gasoline
CO shutoff
Yes
Weight
67kg
Warranty
3yr
Key features
- 10,000 peak watts and 7,600 running watts at less than 3% THD
- 420cc 4-stroke OHV Westinghouse engine with a cast iron sleeve
- Up to 12 hours run time at 25% load on a 5.28 gal (20 L) tank with economy mode
- Electric start with remote key fob, plus emergency recoil start
- Outlets: 4x GFCI 5-20R 20A, 1x L14-30R 120/240V twist-lock, 1x 14-50R 120/240V with rubber covers
- Carbon monoxide sensor with automatic shutdown and automatic low oil shutdown
- VFT display showing voltage output, frequency, and lifetime hours
- Parallel capable
What it is for
- home backup power
- RV or travel trailer
- jobsite
Specifications
| Running watts | 7600 W |
|---|---|
| Peak / surge | 10000 W |
| Fuel | gasoline |
| Tank | 20 L (5.3 gal) |
| CO shutoff | Yes |
| AC output voltage | 120/240V |
| Weight | 67 kg (147.7 lb) |
| Dimensions | 61.0 × 67.8 × 63.8 cm (24.0 × 26.7 × 25.1 in) |
| Warranty | 3 years |
From the Westinghouse page. Values the manufacturer does not publish are left out.
What is in the box
- Oil bottle
- Oil funnel
- Spark plug wrench
- Remote
- Battery float charger
- Battery
- Heavy-duty wheels, handle, and lift bracket
Similar inverter & portable generators
DuroMax XP9500iHT
7600 W, tri-fuel
GenMax GM9000iED
7600 W, dual-fuel
Pulsar PGD95BISCO
7600 W, dual-fuel
Cummins Onan P9500df
7500 W, dual-fuel
WEN GN9500X
7500 W, gasoline
Champion 9000-Watt Tri Fuel Inverter (201176)
7250 W, tri-fuel
DuroStar DS10000EH
8000 W, dual-fuel
Connection and wiring
We have not linked an official manual for this model yet; see the Westinghouse page.
Error codes and troubleshooting
We have not found an official code table for this model yet.
FAQ
Can the Westinghouse ecoGen10000 start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 10000 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.