Blackout Sizer Calculator
EN
Home›Portable Power Stations›Westinghouse›iGen400s

Westinghouse iGen400s

Power station · iGen. Specs from the manufacturer page (checked ).

Westinghouse iGen400s
Photo: Westinghouse

The Westinghouse iGen400s is a 183.6 Wh lithium portable power station with 200 W continuous and 400 W peak output. It has two 120V AC outlets and runs without fuel, fumes, or significant noise. The 100W AC adapter that charges it to 80% in 2 hours is not included.

Check on Amazon →Sponsored link; we may earn a commission.
Capacity
183.6Wh
Continuous
200W
Peak / surge
400W
Chemistry
NMC
Weight
2.51kg
Warranty
2yr

Key features

What it is for

Specifications

Capacity183.6 Wh
Continuous output200 W
Peak / surge400 W
Battery chemistryNMC
AC charging80% in 2 hrs
AC output voltage120V
Weight2.51 kg (5.5 lb)
Dimensions23.9 × 11.4 × 15.0 cm (9.4 × 4.5 × 5.9 in)
Warranty2 years

From the Westinghouse page. Values the manufacturer does not publish are left out.

What is in the box

How long it runs common appliances

ApplianceWattsRuns?Hours
Refrigerator (with freezer)120 W (600 start)surge too high—
Chest freezer100 W (500 start)surge too high—
CPAP (no humidifier)35 W (40 start)yes4.2 h
Gas boiler (pump + controls)120 W (300 start)yes2.4 h
Wi-Fi router + modem/ONU12 Wyes12 h
Starlink (standard dish)60 W (100 start)yes2.4 h
TV 50"75 Wyes1.9 h
Sump pump 1/2 HP920 W (2150 start)surge too high—
Well pump 1/2 HP880 W (2000 start)surge too high—
Space heater 1500 W1500 Wsurge too high—

Assumes 88 % inverter efficiency, 90 % usable capacity and typical duty cycles. Build your own list in the calculator.

Similar portable power stations

Westinghouse iGen400s comparisons

All Westinghouse models →

Connection and wiring

We have not linked an official manual for this model yet; see the Westinghouse page.

Error codes and troubleshooting

We have not found an official code table for this model yet.

FAQ

How long will the Westinghouse iGen400s run a refrigerator?

About 3 hours for a typical 120 W refrigerator that runs 35 % of the time, after inverter and depth-of-discharge losses.

Can the Westinghouse iGen400s start a sump pump or well pump?

Starting surge matters more than running watts: this unit is rated 400 W peak. That is below a typical 1/2 HP sump pump start (about 2150 W); check your pump label. Use the calculator with your exact pump.

Westinghouse iGen400sCheck on Amazon