Westinghouse iGen8200TFc
Generator. Specs from the manufacturer page (checked ).

The Westinghouse iGen8200TFc is a tri-fuel inverter generator rated 6,600 running watts and 8,200 peak watts on gasoline. It runs on gasoline, propane or natural gas, and its 3.9 gallon tank runs it up to 17 hours on gasoline at 25% load. It has a 120/240V 14-50R 50A outlet for home backup and a 3-year limited residential warranty.
Key features
- Gasoline: 6,600 running / 8,200 peak watts; propane: 5,940 running / 7,380 peak watts; natural gas: 5,280 running / 6,560 peak watts
- Total harmonic distortion of 3% or less (less than 3% THD)
- Outlets: one 120/240V 14-50R 50A outlet, one 120V TT-30R 30A RV outlet, and one GFCI 120V 5-20R 20A duplex outlet
- Up to 17 hours run time on gasoline at 25% load from a 3.9 gallon tank; propane run time of 9.8 hours at 25% load
- Push-button electric start and remote start key fob; recoil start is also listed
- Transfer switch or interlock kit ready; parallel capable
- Carbon monoxide (CO) sensor and automatic low oil shutdown
- Around 60 dBA at 25% load; LED data center shows fuel level, power output, run time, voltage and lifetime hours
What it is for
- home backup
- travel trailer use
- jobsites
- campsites
Specifications
| Running watts | 6600 W |
|---|---|
| Peak / surge | 8200 W |
| Fuel | tri-fuel |
| Tank | 14.7 L (3.9 gal) |
| AC output voltage | 120/240V |
| Weight | 61 kg (134.5 lb) |
| Dimensions | 68.6 × 53.1 × 55.1 cm (27.0 × 20.9 × 21.7 in) |
| Warranty | 3 years |
From the Westinghouse page. Values the manufacturer does not publish are left out.
What is in the box
- Remote start key fob
- Battery
- 12V battery charger (battery float charger)
- Oil bottle and oil funnel
- Spark plug wrench and tool kit
- Propane regulator and hose
Similar inverter & portable generators
Pulsar PG7600BiSRCO
Briggs & Stratton 7000 Watt Elite Series
Champion 8500-Watt Dual Fuel Inverter (201175)
WEN DF875iX
WEN GN875iX
A-iPower GXS7600iRD
A-iPower SUA7600iED
Connection and wiring
We have not linked an official manual for this model yet; see the Westinghouse page.
Error codes and troubleshooting
We have not found an official code table for this model yet.
FAQ
Can the Westinghouse iGen8200TFc start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 8200 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.