EcoFlow DELTA Pro Ultra
6144 Wh, 7200 W
Zendure SuperBase V
Home battery · SuperBase V. Specs from the manufacturer page (checked ).
The Zendure SuperBase V is a home battery with 6,438 Wh of capacity in its semi-solid-state version, rated at 3,800 W output with 5,000 W peak. The US model switches its AC output to battery power with 0 ms of downtime, and two units can be linked for up to 7,600 W. Each unit can take up to 4 Satellite Batteries for added capacity.
Check on Amazon →Sponsored link; we may earn a commission.
Capacity
6438Wh
Continuous
3800W
Peak / surge
5000W
Solar input
3000W
Cycles
3000
Expandable
Yes
Key features
- 3,800 W rated output and 5,000 W peak output
- Two units connected with a Home Panel or ZenY cable provide up to 7,600 W
- US model switches to battery power with 0 ms of downtime to its AC output
- Load starting capability of up to 25-32 A LRA (varies by load)
- Solar input up to 3,000 W through the XT-90 port, with one MPPT; accepts third-party panels from 12V to 150V
- Up to 4 Satellite Batteries per unit, up to 8 total with two units
- 3,000+ cycles for the 6400 model with semi-solid-state batteries
- Works with Amazon Alexa and Google Home commands and the Zendure app
What it is for
- Power Independence
- Emergency Backup
- RV/Off-grid Life
- Professional Usage
Specifications
| Capacity | 6438 Wh |
|---|---|
| Continuous output | 3800 W |
| Peak / surge | 5000 W |
| Solar input | 3000 W |
| Expandable | Yes |
| Cycle life | 3000 cycles |
From the Zendure page. Values the manufacturer does not publish are left out.
What is in the box
- Battery cable for connecting a Satellite Battery
How long it runs common appliances
| Appliance | Watts | Runs? | Hours |
|---|---|---|---|
| Refrigerator (with freezer) | 120 W (600 start) | yes | 5.1 days |
| Chest freezer | 100 W (500 start) | yes | 7.1 days |
| CPAP (no humidifier) | 35 W (40 start) | yes | 6.1 days |
| Gas boiler (pump + controls) | 120 W (300 start) | yes | 3.5 days |
| Wi-Fi router + modem/ONU | 12 W | yes | 17.7 days |
| Starlink (standard dish) | 60 W (100 start) | yes | 3.5 days |
| TV 50" | 75 W | yes | 68 h |
| Sump pump 1/2 HP | 920 W (2150 start) | yes | 5.5 h |
| Well pump 1/2 HP | 880 W (2000 start) | yes | 5.8 h |
| Space heater 1500 W | 1500 W | yes | 4.9 h |
Assumes 88 % inverter efficiency, 90 % usable capacity and typical duty cycles. Build your own list in the calculator.
Similar home battery systems
Rich Solar ALPHA 5 PRO
5120 Wh, 5120 W
Fortress Power eFlex MAX 5.4
5374 Wh, 3000 W
Bluetti EnergyPro 6K
7680 Wh, 5760 W
LiTime 48V 100Ah ComFlex Server Rack Battery
5120 Wh, 5120 W
EcoFlow TITAN 5000
5017.6 Wh, 7200 W
Enphase IQ Battery 5P
5000 Wh, 3840 W
Generac PWRcell 2
9000 Wh, 5200 W
Zendure SuperBase V comparisons
On our lists
Connection and wiring
Follow the diagrams in the Zendure manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Open the Zendure manual (PDF) →
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| Battery Failure | A battery fault has been detected. | Contact Zendure Customer Service for further information. Call service if it persists. | 11 |
| High Temperature Protection | The battery is too hot, so the product has activated high temperature protection. | Wait for the battery to cool down. Normal operation resumes automatically after it cools. | 11 |
| Low Temperature Protection | The battery is too cold, so the product has activated low temperature protection. | Wait for the battery temperature to rise above 32°F (0°C). Normal operation resumes automatically once it does. | 11 |
| Overload Protection | The connected load exceeded the product's limit, so overload protection was triggered. | Remove the overloaded device and restart the product. Normal operation resumes automatically. Use electrical appliances within their rated power. | 11 |
From the Zendure manual. All 4 SuperBase V codes →
FAQ
How long will the Zendure SuperBase V run a refrigerator?
About 121 hours for a typical 120 W refrigerator that runs 35 % of the time, after inverter and depth-of-discharge losses.
Can the Zendure SuperBase V start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 5000 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.