Anker SOLIX C1000 Gen 2
1024 Wh, 2000 W
Bluetti AC180
Power station · AC. Specs from the manufacturer page (checked ).
The BLUETTI AC180 is a 1152 Wh portable power station with up to 1800 W constant AC output and a Power Lifting Mode that delivers 2700 W. It uses LiFePO4 batteries rated for over 3500 cycles and weighs 17 kg (37 lb).
Check on Amazon →Sponsored link; we may earn a commission.
Capacity
1152Wh
Continuous
1800W
Peak / surge
2700W
Solar input
500W
Chemistry
LiFePO4
Cycles
3500
Weight
17kg
Warranty
5yr
Key features
- Four 120V AC outlets with 1800 W total output; Power Lifting Mode runs high-power heating devices up to 2700 W
- Also includes USB-A, USB-C, a 12V DC outlet and a wireless charging pad
- AC charging in Turbo mode at up to 1440 W input, filling the unit in 1.3-1.8 hours
- AC charging modes: Silent at 260 W input (4.9-5.4 hours, 45 dB), Standard at around 1000 W input (1.7-2.2 hours)
- Solar input up to 500 W; a full charge takes about 3 hours on a sunny day
- BLUETTI App control and monitoring via Bluetooth
- Can charge and discharge at the same time; can be charged from B80, B230 or B300 batteries in Power Bank Mode (cables required), but capacity expansion is not supported
- Operating range: charging 0-40°C, discharging -20-40°C; not waterproof
What it is for
- Indoor and outdoor use
- Off-grid living
- On-the-go outdoor adventures
Specifications
| Capacity | 1152 Wh |
|---|---|
| Continuous output | 1800 W |
| Peak / surge | 2700 W |
| Solar input | 500 W |
| Battery chemistry | LiFePO4 |
| Cycle life | 3500 cycles |
| AC charging | fill it up in only 1.3-1.8 hours |
| AC output voltage | 120V |
| Weight | 17 kg (37.5 lb) |
| Dimensions | 34 × 24.7 × 31.7 cm (13.4 × 9.7 × 12.5 in) |
| Warranty | 5 years |
From the Bluetti page. Values the manufacturer does not publish are left out.
How long it runs common appliances
| Appliance | Watts | Runs? | Hours |
|---|---|---|---|
| Refrigerator (with freezer) | 120 W (600 start) | yes | 22 h |
| Chest freezer | 100 W (500 start) | yes | 30 h |
| CPAP (no humidifier) | 35 W (40 start) | yes | 26 h |
| Gas boiler (pump + controls) | 120 W (300 start) | yes | 15 h |
| Wi-Fi router + modem/ONU | 12 W | yes | 3.2 days |
| Starlink (standard dish) | 60 W (100 start) | yes | 15 h |
| TV 50" | 75 W | yes | 12 h |
| Sump pump 1/2 HP | 920 W (2150 start) | yes | 1.0 h |
| Well pump 1/2 HP | 880 W (2000 start) | yes | 1.0 h |
| Space heater 1500 W | 1500 W | yes | 0.9 h |
Assumes 88 % inverter efficiency, 90 % usable capacity and typical duty cycles. Build your own list in the calculator.
Similar portable power stations
Jackery Explorer 1000 v2
1070 Wh, 1500 W
EcoFlow DELTA 3 Plus
1024 Wh, 1800 W
Jackery Explorer 1500 Ultra
1536 Wh, 1800 W
Jackery Explorer 1000 Plus
1264 Wh, 2000 W
EcoFlow DELTA 3
1024 Wh, 1800 W
Jackery Explorer 1500 v2
1536 Wh, 2000 W
Generac GB1000
1086 Wh, 1600 W
Bluetti AC180 comparisons
- AC180 vs Anker SOLIX C1000 Gen 2
- AC180 vs Jackery Explorer 1000 v2
- AC180 vs EcoFlow DELTA 3 Plus
- AC180 vs Jackery Explorer 1500 Ultra
- AC180 vs Jackery Explorer 1000 Plus
- AC180 vs EcoFlow DELTA 3
All 29 comparisons
- AC180 vs Jackery Explorer 1500 v2
- AC180 vs Generac GB1000
- AC180 vs EcoFlow DELTA 2
- AC180 vs Jackery HomePower 1000 v2
- AC180 vs DJI Power 1000 Mini
- AC180 vs Westinghouse iGen1000s
- AC180 vs Pecron E1500LFP
- AC180 vs Allpowers R1500 LITE
- AC180 vs Pecron E1000LFP
- AC180 vs Firman Zero E (E201001)
- AC180 vs Vtoman Jump 1800
- AC180 vs Vtoman FlashSpeed 2400
- AC180 vs Dabbsson 1000L
- AC180 vs Dabbsson DBS1400 Pro
- AC180 vs Anker SOLIX F1500
- AC180 vs Yoshino B2000 SST
- AC180 vs Allpowers S2000 Pro
- AC180 vs Anker SOLIX C1000
- AC180 vs Enphase IQ PowerPack 1500
- AC180 vs Oukitel P1000 PLUS
- AC180 vs Jackery FridgeGuard
- AC180 vs Allpowers P1800
- AC180 vs WEN PP1030i
Connection and wiring
Follow the diagrams in the Bluetti manual.
Open the Bluetti manual (PDF) →
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| E004 | The output voltage is outside the expected range, or the grid connection is not proper. | Ensure the output voltage is within ±10% of the rated voltage or proper grid connection. | 21 |
| E016 | The internal fan is blocked, unplugged, or not functioning properly. | Check if the fan is blocked, unplugged, or not functioning properly. Ensure proper ventilation. | 21 |
| E117 | Grid oscillation has been detected at the grid input. | Disconnect the grid input and contact BLUETTI support for further assistance. Call service if it persists. | 21 |
| E074 | The battery management system (BMS) has detected a fault. The specific fault is shown in the mobile app. | Check the specific fault in the mobile app. If the battery is too hot or too cold, let the unit reach a suitable temperature before charging or using it (charging -15°C to 40°C; discharging -25°C to 40°C). | 22 |
| Others | Other errors not listed in the error code table. | Contact BLUETTI support for help. Call service if it persists. | 22 |
| E001 | The inverter is overloaded because the connected devices draw too much power. | Check whether the power consumption of your devices is too high. Reduce the load if necessary. | 23 |
6 of 23 codes. From the Bluetti manual. All 23 Elite 200 V2 / Apex 300 / Elite 100 V2 / AC70 codes →
FAQ
How long will the Bluetti AC180 run a refrigerator?
About 22 hours for a typical 120 W refrigerator that runs 35 % of the time, after inverter and depth-of-discharge losses.
Can the Bluetti AC180 start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 2700 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.