Blackout Sizer Calculator
EN
Home›Portable Power Stations›Bluetti›AC180P

Bluetti AC180P

Power station. Specs from the manufacturer page (checked ).

Bluetti AC180P
Photo: Bluetti

The BLUETTI AC180P is a 1440 Wh portable power station with 1800 W constant AC output and a Power Lifting Mode that delivers 2700 W. It uses LiFePO4 batteries rated for 3500+ cycles and weighs about 16 kg (35.27 lb).

Check on Amazon →Sponsored link; we may earn a commission.
Capacity
1440Wh
Continuous
1800W
Peak / surge
2700W
Solar input
500W
Chemistry
LiFePO4
Cycles
3500
Weight
16kg

Key features

What it is for

Specifications

Capacity1440 Wh
Continuous output1800 W
Peak / surge2700 W
Solar input500 W
Battery chemistryLiFePO4
Cycle life3500 cycles
AC charging0-80% recharging only takes 45mins
AC output voltage120V
Weight16 kg (35.3 lb)
Dimensions34.0 × 24.7 × 31.7 cm (13.4 × 9.7 × 12.5 in)

From the Bluetti page. Values the manufacturer does not publish are left out.

How long it runs common appliances

ApplianceWattsRuns?Hours
Refrigerator (with freezer)120 W (600 start)yes27 h
Chest freezer100 W (500 start)yes38 h
CPAP (no humidifier)35 W (40 start)yes33 h
Gas boiler (pump + controls)120 W (300 start)yes19 h
Wi-Fi router + modem/ONU12 Wyes4.0 days
Starlink (standard dish)60 W (100 start)yes19 h
TV 50"75 Wyes15 h
Sump pump 1/2 HP920 W (2150 start)yes1.2 h
Well pump 1/2 HP880 W (2000 start)yes1.3 h
Space heater 1500 W1500 Wyes1.1 h

Assumes 88 % inverter efficiency, 90 % usable capacity and typical duty cycles. Build your own list in the calculator.

Similar portable power stations

Bluetti AC180P comparisons

All 15 comparisons

All Bluetti models →

Connection and wiring

Follow the diagrams in the Bluetti manual.

Open the Bluetti manual (PDF) →

Error codes and troubleshooting

CodeMeaningWhat to doManual page
E004The output voltage is outside the expected range, or the grid connection is not proper.Ensure the output voltage is within ±10% of the rated voltage or proper grid connection.21
E016The internal fan is blocked, unplugged, or not functioning properly.Check if the fan is blocked, unplugged, or not functioning properly. Ensure proper ventilation.21
E117Grid oscillation has been detected at the grid input.Disconnect the grid input and contact BLUETTI support for further assistance. Call service if it persists.21
E074The battery management system (BMS) has detected a fault. The specific fault is shown in the mobile app.Check the specific fault in the mobile app. If the battery is too hot or too cold, let the unit reach a suitable temperature before charging or using it (charging -15°C to 40°C; discharging -25°C to 40°C).22
OthersOther errors not listed in the error code table.Contact BLUETTI support for help. Call service if it persists.22
E001The inverter is overloaded because the connected devices draw too much power.Check whether the power consumption of your devices is too high. Reduce the load if necessary.23

6 of 23 codes. From the Bluetti manual. All 23 Elite 200 V2 / Apex 300 / Elite 100 V2 / AC70 codes →

FAQ

How long will the Bluetti AC180P run a refrigerator?

About 27 hours for a typical 120 W refrigerator that runs 35 % of the time, after inverter and depth-of-discharge losses.

Can the Bluetti AC180P start a sump pump or well pump?

Starting surge matters more than running watts: this unit is rated 2700 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.

Bluetti AC180PCheck on Amazon