Jackery Explorer 300D
288 Wh, 140 W
Bluetti Elite 30 V2
Power station · Elite. Specs from the manufacturer page (checked ).
The Bluetti Elite 30 V2 is a 288 Wh portable power station with 600 W continuous output and up to 1,500 W of momentary lifting power. It uses LiFePO4 battery cells rated for 3,000+ charge cycles and has 9 output ports. The page says it recharges to 80% in 45 minutes with TurboBoost charging.
Check on Amazon →Sponsored link; we may earn a commission.
Capacity
288Wh
Continuous
600W
Peak / surge
1500W
Chemistry
LiFePO4
Cycles
3000
Weight
4.3kg
Warranty
5yr
Key features
- 288 Wh capacity with 9 output ports
- 600 W continuous output; up to 1,500 W momentary for resistive devices
- UPS switchover in 10 ms or less, with up to 980 W bypass power
- USB-C port with PD 3.1, up to 140 W output
- TurboBoost charging: 80% in 45 minutes
- UltraCell technology: up to 50% less self-consumption, 4.5 W standby
- Operation below 30 dB
- BLUETTI app control with charging and power limits, scheduling, Memory Mode, and WiFi or Bluetooth monitoring
- 3,000+ charge cycles, 10-year lifespan, 5-year warranty
What it is for
- Home backup
- Camping
- RVs
- Road trips
Specifications
| Capacity | 288 Wh |
|---|---|
| Continuous output | 600 W |
| Peak / surge | 1500 W |
| Battery chemistry | LiFePO4 |
| Cycle life | 3000 cycles |
| Weight | 4.3 kg (9.5 lb) |
| Warranty | 5 years |
From the Bluetti page. Values the manufacturer does not publish are left out.
What is in the box
- AC Charging Cable x1
- Car Charging Cable x1
- Grounding Screw x1
- User Manual x1
How long it runs common appliances
| Appliance | Watts | Runs? | Hours |
|---|---|---|---|
| Refrigerator (with freezer) | 120 W (600 start) | yes | 5.4 h |
| Chest freezer | 100 W (500 start) | yes | 7.6 h |
| CPAP (no humidifier) | 35 W (40 start) | yes | 6.5 h |
| Gas boiler (pump + controls) | 120 W (300 start) | yes | 3.8 h |
| Wi-Fi router + modem/ONU | 12 W | yes | 19 h |
| Starlink (standard dish) | 60 W (100 start) | yes | 3.8 h |
| TV 50" | 75 W | yes | 3.0 h |
| Sump pump 1/2 HP | 920 W (2150 start) | surge too high | — |
| Well pump 1/2 HP | 880 W (2000 start) | surge too high | — |
| Space heater 1500 W | 1500 W | surge too high | — |
Assumes 88 % inverter efficiency, 90 % usable capacity and typical duty cycles. Build your own list in the calculator.
Similar portable power stations
Westinghouse iGen300s
296 Wh, 300 W
Jackery Explorer 240 v2
256 Wh, 300 W
BougeRV JuiceGo
240 Wh, 150 W
Allpowers R600
299 Wh, 600 W
Goal Zero Yeti 300
296.96 Wh, 350 W
Jackery Explorer 300 Plus
288 Wh, 300 W
Pecron E300LFP
288 Wh, 600 W
Bluetti Elite 30 V2 comparisons
- Elite 30 V2 vs Jackery Explorer 300D
- Elite 30 V2 vs Westinghouse iGen300s
- Elite 30 V2 vs Jackery Explorer 240 v2
- Elite 30 V2 vs BougeRV JuiceGo
- Elite 30 V2 vs Allpowers R600
- Elite 30 V2 vs Goal Zero Yeti 300
All 13 comparisons
Connection and wiring
Follow the diagrams in the Bluetti manual.
Open the Bluetti manual (PDF) →
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| E004 | The output voltage is outside the expected range, or the grid connection is not proper. | Ensure the output voltage is within ±10% of the rated voltage or proper grid connection. | 21 |
| E016 | The internal fan is blocked, unplugged, or not functioning properly. | Check if the fan is blocked, unplugged, or not functioning properly. Ensure proper ventilation. | 21 |
| E117 | Grid oscillation has been detected at the grid input. | Disconnect the grid input and contact BLUETTI support for further assistance. Call service if it persists. | 21 |
| E074 | The battery management system (BMS) has detected a fault. The specific fault is shown in the mobile app. | Check the specific fault in the mobile app. If the battery is too hot or too cold, let the unit reach a suitable temperature before charging or using it (charging -15°C to 40°C; discharging -25°C to 40°C). | 22 |
| Others | Other errors not listed in the error code table. | Contact BLUETTI support for help. Call service if it persists. | 22 |
| E001 | The inverter is overloaded because the connected devices draw too much power. | Check whether the power consumption of your devices is too high. Reduce the load if necessary. | 23 |
6 of 23 codes. From the Bluetti manual. All 23 Elite 200 V2 / Apex 300 / Elite 100 V2 / AC70 codes →
FAQ
How long will the Bluetti Elite 30 V2 run a refrigerator?
About 5 hours for a typical 120 W refrigerator that runs 35 % of the time, after inverter and depth-of-discharge losses.
Can the Bluetti Elite 30 V2 start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 1500 W peak. That is below a typical 1/2 HP sump pump start (about 2150 W); check your pump label. Use the calculator with your exact pump.