Dabbsson 300E
Power station. Specs from the manufacturer page (checked ).

The Dabbsson 300E is a 298 Wh portable power station with 300 W AC output. It uses a semi-solid state LFP battery and can be recharged from AC, solar, a car, or AC and solar together. The page lists its weight at 9.4 lbs.
Key features
- 300 W AC output from a 298 Wh battery
- Semi-solid state LFP battery rated for 4000 charge cycles and a 10-year lifespan
- Solar recharge from 0-100% in 3 hours
- AC and solar dual charging combined at 220 W
- 1.5× longer runtime with devices under 150 W
- One car outlet plus multiple USB-A and USB-C ports
- Can charge and discharge at the same time
- Fan noise of 25 dB at low power use and in quiet mode, 25–50 dB overall
- Smart energy management through the Dabbsson App
What it is for
- Outdoor use
Specifications
| Capacity | 298 Wh |
|---|---|
| Continuous output | 300 W |
| Battery chemistry | LiFePO4 |
| Weight | 4.26 kg (9.4 lb) |
| Warranty | 3 years |
From the Dabbsson page. Values the manufacturer does not publish are left out.
How long it runs common appliances
| Appliance | Watts | Runs? | Hours |
|---|---|---|---|
| Refrigerator (with freezer) | 120 W (600 start) | surge too high | — |
| Chest freezer | 100 W (500 start) | surge too high | — |
| CPAP (no humidifier) | 35 W (40 start) | yes | 6.7 h |
| Gas boiler (pump + controls) | 120 W (300 start) | yes | 3.9 h |
| Wi-Fi router + modem/ONU | 12 W | yes | 20 h |
| Starlink (standard dish) | 60 W (100 start) | yes | 3.9 h |
| TV 50" | 75 W | yes | 3.1 h |
| Sump pump 1/2 HP | 920 W (2150 start) | surge too high | — |
| Well pump 1/2 HP | 880 W (2000 start) | surge too high | — |
| Space heater 1500 W | 1500 W | surge too high | — |
Assumes 88 % inverter efficiency, 90 % usable capacity and typical duty cycles. Build your own list in the calculator.
Similar portable power stations
Allpowers R600
Vtoman Jump 600X
Bluetti EB3A
Goal Zero Yeti 300
Pecron E300LFP
Allpowers VOLIX P300
Aferiy P040 (Nomad400)
Dabbsson 300E comparisons
- 300E vs BougeRV JuiceGo
- 300E vs Allpowers R600
- 300E vs Vtoman Jump 600X
- 300E vs Bluetti EB3A
- 300E vs Goal Zero Yeti 300
- 300E vs Pecron E300LFP
All 8 comparisons
Connection and wiring
Follow the diagrams in the Dabbsson manual.
Open the Dabbsson manual (PDF) →
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| AC High Temperature Protection | The product has overheated on the AC output side and protection has shut off AC output. | No action is required. Normal operation resumes automatically after the product cools down. | 21 |
| AC Output Overload Protection | The AC output is overloaded and its protection has shut off AC output. | Remove the overloaded device, then restart the product. Normal operation resumes automatically after the overloaded device is removed. | 21 |
| DC Output Overload Protection | The DC outlet is overloaded and its protection has shut off DC output. | Remove the device connected to the DC outlet. Normal operation resumes automatically after the device is removed. | 21 |
| Fan Blockage | The product's cooling fan is blocked, which can cause overheating. | Check whether the fan is blocked and clear any obstruction at the fan inlet or outlet. Normal operation resumes automatically after the product cools down. | 21 |
| High Temperature Charge Protection | The battery is too hot to charge safely, so charging has been stopped by protection. | No action is required. Charging resumes automatically after the battery cools down. | 21 |
| High Temperature Discharge Protection | The battery is too hot to discharge safely, so power supply has been cut by protection. | No action is required. Power supply resumes automatically after the battery cools down. | 21 |
6 of 9 codes. From the Dabbsson manual. All 9 1000L / 600L / 3000L / DBS2100 Pro codes →
FAQ
How long will the Dabbsson 300E run a refrigerator?
About 6 hours for a typical 120 W refrigerator that runs 35 % of the time, after inverter and depth-of-discharge losses.
Can the Dabbsson 300E start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 300 W output (no separate peak published). That is below a typical 1/2 HP sump pump start (about 2150 W); check your pump label. Use the calculator with your exact pump.