A-iPower AP3700i
3200 W, gasoline
PowerSmart DB5035
Generator. Specs from the manufacturer page (checked ).
The PowerSmart DB5035 is a gasoline inverter generator rated at 3,200 W with 4,000 W peak output. It has 120V 20A and 120V 30A outlets, 12V DC and USB ports, and can be connected in parallel with a compatible generator.
View at PowerSmart →Sponsored link; we may earn a commission.
Running
3200W
Peak / surge
4000W
Fuel
gasoline
Key features
- 3,200 W rated and 4,000 W peak output
- 120V 20A and 120V 30A outlets
- 12V DC and USB ports
- 120V 30A outlet for compatible RVs
- Parallel-ready: connect a compatible generator for more power
- Multi-function meter for key information
- Eco Control adjusts output based on power demand
What it is for
- home use
- outdoor use
- RV
Specifications
| Running watts | 3200 W |
|---|---|
| Peak / surge | 4000 W |
| Fuel | gasoline |
| AC output voltage | 120V |
From the PowerSmart page. Values the manufacturer does not publish are left out.
Similar inverter & portable generators
EcoFlow Smart Generator (Dual Fuel)
3200 W, dual-fuel
GenMax GM3500iAED
3200 W, dual-fuel
GenMax GM3500Xi
3200 W
Pulsar GD400BN
3200 W, dual-fuel
Pulsar PGD40iSCO
3200 W, gasoline
WEN 56400iX
3200 W, gasoline
WEN DF400i
3200 W, dual-fuel
Connection and wiring
Follow the diagrams in the PowerSmart manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| Low-voltage | The multi-function meter flashes to indicate a low-voltage condition in the output. | Press the MENU button for about 3 seconds to restore the display. | 9 |
| Maintenance | The indicator light flashes when the generator needs maintenance. | Maintain the generator promptly when the maintenance indicator flashes. | 9 |
| Oil Warning Light (Yellow) | Low oil level alarm. It prevents engine damage from insufficient crankcase oil by automatically shutting down the engine before oil falls to an unsafe level. The engine switch stays ON. | Fill the engine oil to the upper limit (H) and check the level regularly. If the engine is restarted with low oil, the yellow light stays on and the engine will not run. Add oil, then restart. | 9 |
| Over-current | The multi-function meter flashes to indicate an over-current condition. | Press the MENU button for about 3 seconds to restore the display. | 9 |
| Over-voltage | The multi-function meter flashes to indicate an over-voltage condition in the output. | Press the MENU button for about 3 seconds to restore the display. | 9 |
| Short-circuit | The multi-function meter flashes when a short circuit has occurred. | Remove all applied loads, then press the MENU button for about 3 seconds to restore the display. | 9 |
6 of 10 codes. From the PowerSmart manual. All 10 PS5046CE / DB5035 / DB5068 codes →
FAQ
Can the PowerSmart DB5035 start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 4000 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.