Pulsar PG3250
Generator · Pulsar Portable Generator. Specs from the manufacturer page (checked ).

The Pulsar PG3250 is a gasoline-powered portable generator rated at 2,500 running watts and 3,250 peak watts. It uses a 7 HP single-cylinder engine with a 4-gallon fuel tank and runs up to 12 hours at 50% load.
Key features
- Outputs: 3,250 peak watts and 2,500 running watts
- Two 120V AC outlets and one 12V DC output
- 7 HP, single-cylinder, 4-stroke OHV engine
- 4-gallon fuel tank, up to 12 hours of continuous use at 50% load
- Recoil start system
- Low oil indicator to help prevent engine damage
What it is for
- outdoor recreation
- remote job sites
- backup use around the house
Specifications
| Running watts | 2500 W |
|---|---|
| Peak / surge | 3250 W |
| Fuel | gasoline |
| Run time at 50 % load | 12 h |
| AC output voltage | 120V |
From the Pulsar page. Values the manufacturer does not publish are left out.
Similar inverter & portable generators
Honda EU3200i
Generac GP3000i
Ryobi RYI2322E
WEN DF280iX
Cummins Onan P2500i
DeWalt DXGNI2200
Generac 2500i
Connection and wiring
Follow the diagrams in the Pulsar manual. Connecting to a home panel needs a transfer switch or interlock and a licensed electrician.
Open the Pulsar manual (PDF) →
Error codes and troubleshooting
We found no error-code table in this manual. Its troubleshooting section is the reference.
FAQ
How long does the Pulsar PG3250 run on a tank?
The maker rates it at 12 hours at 50 % load (about 1,250 W). A light load such as a refrigerator and lights runs longer; a full load runs shorter.
Can the Pulsar PG3250 start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 3250 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.